#GeneralMotors

General Motors isn’t confirming a Reuters report that claims the automaker’s Detroit-Hamtramck plant will give birth to an electric commercial van. Such a product would give GM a leg up in a fledgling segment that’s yet to be exploited by the likes of Tesla.

Commercial vans aren’t glitzy products, but they do sell in significant numbers. More importantly, rival Ford has released a plug-in hybrid version of its Euro-market Transit Custom and has promised an electric Transit for North American customers for 2022. For a company hoping to match Ford product-for-product, this will not stand.

On Tuesday, General Motors CEO Mary Barra suggested her company would exit the other side of the coronavirus pandemic running much leaner than when it went in. While this will probably be the case for other automakers, as many (including General Motors) went into 2020 with restructuring efforts planned or already underway, GM is letting everyone know it’s doing cuts extra right.

This likely has to do with the automaker not wanting to look as though it’s in for a repeat of 2008, now that the global economy’s once again careening toward troubled times — but we’re just guessing. It also seems as though the extreme lack of industrial progress created by months of factory shutdowns has forced executives to fill the void with a lot of hot air. Fortunately, Barra’s message wasn’t totally devoid of useful information.

They’re still out there, just not in the same concentration as before. Two weeks after the U.S. auto industry restarted production in force, long-term, no-interest loans are becoming as hard to find as Lysol wipes.

At General Motors, which wooed many a truck buyer with zero-percent/84-month financing during the coronavirus lockdown, the good times seem to be over for buyers. However, some lucky individuals might be saved by timing.

There’s a production backlog to be made up for, and industry giants Ford and General Motors don’t want to ease up on the throttle.

Rather than schedule a normal amount of summer downtime for plants and their employees, both automakers plan to pare back their normal idle period for select plants, ensuring a healthy flow of product that’s only just now ramping up after two months offline.

There’s inventories to be filled with trucks and crossovers, and time’s wasting. After staging a cautious, production-limited restart of its North American assembly plants on May 18th, General Motors is prepared to put its foot down, boosting output at numerous locations.

Hungry dealers can’t wait.

While General Motors earned the right to resume production in Mexico on Thursday, parts procurement in the gradually reopening North American economy remains a serious roadblock.

U.S. plants came online May 18th following two months of pandemic-prompted downtime. Of topmost importance to all members of the Detroit Three are their hot-selling pickup lines, though UAW- and state-approved health protocol calls for a slow ramp-up, with all plants operating on reduced shifts. Parts supply will dictate those ramp-ups; in GM’s case, boosted pickup production in the Midwest will have to wait.

General Motors received good news on Thursday, earning approval from the Mexican government to fire up its extensive manufacturing presence in that country after weeks of coronavirus downtime.

The green light to resume production will help the automaker restock its all-important pickup shelves, though assembly won’t turn on a dime.

Today’s letter is clearly “T” — as far as GMC’s concerned, anyway. With little else to show off during These Trying Times, General Motors’ truck division decided to remind the public that its plan to release a large electric pickup bearing the Hummer name hasn’t changed. Just the timing.

In said truck, which was bound for a May 20th debut before the coronavirus pandemic kiboshed those plans, gazing at the stars or taking shots at enemy aircraft in some sort of Mad Max-like post-apocalyptic scenario will be made all the more easier with removable roof panels.

Reeling from the pandemic-born financial crisis, Hertz is unloading some particularly cost-intensive vehicles from its rental fleet. While plenty of these vehicles are old stock it would have had to get rid of eventually, Hertz is limiting fleet turnover this year, recently cancelling roughly 90 percent of new vehicle orders it had on the books for 2020. The company’s also selling some of the special performance vehicles slotted into its lineup every year ⁠— and not all of them seem to have accrued the kind of mileage that would normally warrant a sale.

We’ve chronicled the rental agency’s plight for a while now; Hertz seems to be on the brink of declaring bankruptcy, making it a good case study for the perils confronting auto rental groups everywhere. While we don’t think selling a handful of high-horsepower Chevrolets will be anyone’s saving grace, it might help Hertz scrounge up some loose cash — and provide a half-decent opportunity for enthusiasts to procure a bargain project car.

Cruise, the self-driving arm of General Motors, is cutting roughly 8 percent its full-time staff as coronavirus lockdowns mar the economy and companies walk back development programs. You might have noticed the hype surrounding autonomous cars started dying down even before 2020 became the most miserable year in recent memory.

That made them prime candidates for cost-saving cuts. Health concerns have likewise made autonomous concepts like “robotaxis,” where occupants are confined together in small, self-driving shuttles, far less appetizing. Cruise actually showed off a six-passenger AV it developed and built back in January. Interested in paying to ride face to face with complete strangers?

We didn’t think so.

Production at General Motors’ Mexican assembly plants could start up next week, following a go-ahead from the country’s leadership to resume factory activity. The faster GM’s able to come back online south of the Rio Grande, the better.

In an earnings briefing last week, GM, like its rival Fiat Chrysler, pointed to a declining inventory of lucrative pickups — a segment that proved extremely resilient over the past two months, even during the depths of the coronavirus lockdown. With U.S. plants resuming work on Monday, a concurrent Mexican restart is what the company needs.

With General Motors aiming for a May 18th restart of North American vehicle production, powertrain components, in some cases, need a head start. That’s why May 11th will be the first day back to work for many employees of GM’s St. Catharines Propulsion Plant, home to much-used V6 and V8 engines, as well as a transmission.

The gradual return to work ahead of GM’s restart date comes after the Canadian labor leader Jerry Dias expressed concern over workplace safety.

Mercedes-Benz is nixing its all-electric EQ hatchback, according to R&D boss Markus Schäfer. Instead, it’s going to play a GLA-sized EQA crossover as its next hand.

Speaking with Autocar, Schäfer basically said it was a question of market demand. The EQC has already been delayed until at least 2021 for U.S. customers, though we’ve heard talk that its suspension could prove indefinite as the brand reassesses what should — and shouldn’t — be included in its future lineup. “We have to watch customer demand and, at the moment, SUVs and crossovers are the absolute favorites. Those are our first priorities,” Mercedes’ R&D head explained.

It’s only the latest chapter in a complicated story about an industry that’s constantly having to rethink how it handles electric cars.

Things change, and things fall apart. Both of these truths can be applied to best-laid plans, but they ring especially true for those of General Motors.

GM might have wanted 2020 Chevrolet Corvette production to run uninterrupted from late last fall through this summer, but a series of ever-larger crises managed to keep its production numbers down to a trickle. The result is a first-model-year run so small, it’s almost guaranteed to make every 2020 ‘Vette sold a de facto Launch Edition model.

Like its domestic rival, Fiat Chrysler, General Motors is also looking to begin firing up U.S. assembly plants on May 18th. The news first came by way of The Detroit Free Press, which learned of alerts sent from plant managers to UAW workers at GM’s Lansing Delta Township and Flint operations. The automaker later confirmed this via its first-quarter 2020 earnings report.

The non-renewal of Michigan’s stay-at-home orders (which run through May 15th), coupled with a new, company-wide health protocol and the UAW’s quiet acquiescence to a Detroit Three reopening, seemed to pave the way for a firm restart date.