What the FC RX-7 Always Needed Was… A General Motors V-6

Jack Baruth
by Jack Baruth

I needed something cheap, fuel efficient, and at least as powerful as the rotary it would replace… What I came across was something that didn’t excite me much but fit the bill fairly well, a 3.8 liter V6 and T5 transmission out of a 98 Camaro complete with ECU and harness, the price, $600… Turns out GM had their stuff together on this little bastard. It’s a little heavy due to being all cast iron and the heads don’t flow well but it’s rock solid reliable and gets great mileage. Plus it’s power numbers are not far from the 5.0/T5 I was originally looking for. Time to get transplanting.

And that’s how a fellow in an Ohio garage wound up building a race-winning RX-7 that happens to be powered by a Series II 3800 V6.

Johnstown, Ohio’s Matt “Tinman” Johnston has acquired a fair bit of rep in the Midwestern racing community for fabricating all sorts of things from scratch. Your humble author directly credits him with his continued existence on this planet: a few years ago I hit the Armco at Mid-Ohio nose-first at a very high speed and kept my legs thanks to a Tinman-built cage.

Several years ago, Tinman put an actual NASCAR V-8 in an FC RX-7. The resulting car was great for midnight street racing but a little difficult to operate on a road course. So he did what you’d expect: bought another RX-7 and put a V-6 in it. The full build of the car, along with all sorts of drool-inducing shots of rollcages and whatnot, can be read at NoRotors.

Without the NASA-required ballast, the Mazda weighs 2,470 pounds dry and puts 199 horsepower to the rear wheels. It’s capable of running with 370Zs and the like on-track. Tinman’s won a few NASA races with it, but he’s now building himself some sort of tube-framed ASC road-race stock car powered by a NASCAR V-8. Therefore, the RX-7 is for sale.

What’s next for Tinman, after the stock car? I’m glad you asked. It’s a 2.4L Plymouth Voyager engine swap into a certain Lapis Blue Neon… that’s right, after three years away from NASA Performance Touring, I’m returning. With a vengeance. Well, strictly speaking, there’s no real vengeance involved. But it sounded cool when I thought about writing it. The big-block Neon might well find itself lined up against the RX-7 at Mid-Ohio next spring, so if you think you have what it takes to show your tailpipes to my Mopar, you know where to send the check, right?

Jack Baruth
Jack Baruth

More by Jack Baruth

Comments
Join the conversation
2 of 41 comments
  • Ronnie Schreiber Ronnie Schreiber on Jun 18, 2013

    I'm sure that the 3800 II is more common in junkyards, but the Buick/Rover aluminum V8 weighs about 75 lbs less. It even came in turbocharged version from Oldsmobile. Brabham won the 1966 F1 constructors championship with an engine based on the Oldsmobile version.

  • Raph Raph on Jun 18, 2013

    How do forced induction engines fair in road racing? My car with its puny heat exchanger gets heat soaked rather quickly (then again it has an overdriven HEaton on it) as an example, 3 pulls on a dyno and the car is already snatching timing. Given this it seems like a naturally aspirated engine would be the ticket since power remains fairly constant.

  • MaintenanceCosts Poorly packaged, oddly proportioned small CUV with an unrefined hybrid powertrain and a luxury-market price? Who wouldn't want it?
  • MaintenanceCosts Who knows whether it rides or handles acceptably or whether it chews up a set of tires in 5000 miles, but we definitely know it has a "mature stance."Sounds like JUST the kind of previous owner you'd want…
  • 28-Cars-Later Nissan will be very fortunate to not be in the Japanese equivalent of Chapter 11 reorganization over the next 36 months, "getting rolling" is a luxury (also, I see what you did there).
  • MaintenanceCosts RAM! RAM! RAM! ...... the child in the crosswalk that you can't see over the hood of this factory-lifted beast.
  • 3-On-The-Tree Yes all the Older Land Cruiser’s and samurai’s have gone up here as well. I’ve taken both vehicle ps on some pretty rough roads exploring old mine shafts etc. I bought mine right before I deployed back in 08 and got it for $4000 and also bought another that is non running for parts, got a complete engine, drive train. The mice love it unfortunately.
Next