Rare Rides Icons: The History of Stutz, Stop and Go Fast (Part VII)
We pick up the Stutz story again today, as the super luxurious American brand went off to the automotive graveyard in the sky. Troubled by braking issues, dated product, and management keen to ignore the brand’s racing heritage, Stutz poured its limited development dollars onto delivery trucks and a rather sophisticated DOHC straight-eight engine. Both those developments were finished around the time of the Great Depression.
Unfortunately for Stutz, circa 1930 there was little demand for a new type of delivery truck, and really no demand at all for six-figure (adjusted) luxury cars. The company went bankrupt in 1937 and was liquidated fully in 1939. But the legendary name was not forgotten by certain people in Indianapolis who wore wide lapel suits.
First, a sidebar to explain the neoclassical automobile. At some point in the early Sixties and continuing on through the mid-Eighties, various small American car companies began a new type of coachbuilding. It was coachbuilding on common platforms, with exterior designs that could generally be considered exaggerated retro. Called “neoclassic,” various modern automobiles (often coupes) were turned into throwback cars that aggregated various styling elements from the Twenties and Thirties.
People alive in the Twenties and Thirties were still of car buying and driving age at the time, and a select subset of them yearned for the styling of the past. Flared wheel arches, sweeping rocker panels, free-standing headlamps, chromed exterior ductwork, and enormous spare tire covers. All these things fell within the realm of the neoclassical. Their manufacturers used every design cue that could be made out of steel, fiberglass panels, or recreated with bolt-on parts available from J.C. Whitney or wherever.
Key elements of a neoclassical car were the big upright grille, freestanding headlamps, and fenders separate from the bodywork. Most often these styling features were applied to things with two doors, and created a classic looking coupe with Sixties/Seventies personal luxury touches inside. Excalibur was the first company to go neoclassical in the Sixties, and others like Panther, Zimmer, and indeed Stutz weren’t too far behind.
One of the latter examples of a neoclassical was the ridiculously expensive Zimmer Quicksilver, or Pontiac Fiero SuperThrust Length Edition if you prefer. Neoclassicals died during the Eighties when those who could still recall the Twenties and Thirties died off and the personal luxury coupe era started its decline. We could have more neoclassical lecturing, but let’s move on to our topic of the day.
Stutz remained in a dormant state through the mid-Sixties, at which point it was acquired and reinvigorated at the hands of wealthy banking enthusiast James O’Donnell. O’Donnell gathered funds from various sources, and in 1968 was ready to reincorporate the former Stutz Motor Car Company of America into a new entity: Stutz Motor Car of America, Inc. Mr. O’Donnell had seen the promise of the neoclassical automobile courtesy of Excalibur and was inspired by some design work completed by former Chrysler associate Virgil Exner in 1963.
At that time Exner was freshly available to design as he wanted. He’d been let go from Chrysler after disagreements with management over the discontinuation of his ever-wackier styling themes, particularly where the Imperial was concerned. Exner incorporated a design company in his own name in 1963, and at the end of that year showed off a series of what he called “Revival Cars” for dead brands. The cars were presented in Esquire magazine and were sort of neoclassical takes on the looks of Duesenberg, Packard, Mercer, and Stutz.
Of those, only the Duesenberg initially went anywhere: There was an effort to rebirth the brand circa 1965. An actual prototype was constructed by Ghia of Italy in 1966 but was never put into production. The large sedan was built on top of a Chrysler Imperial chassis, probably because the D-body was the most heavy-duty production car available as a basis.
That is until O’Donnell started his new car company. Ghia was again contracted to build a prototype example of the Stutz Blackhawk, which in theory would be similar to the one Exner designed in 1963. However, the original ’63 Blackhawk didn’t carry through to the 1968 rework at O’Donnell’s behest. The 1963 design reflected a bumper that jutted far forward from the hood, thin A-pillars, and a spare tire presented on the rear deck inside some large buttresses.
What Exner reworked for the 1968 prototype and subsequent 1970 Blackhawk’s debut was more akin to a take on an over-styled Pontiac Grand Prix. A large chromed coffin nose leads the way, split down the middle, and backed in mesh. A red Stutz logo took the place of any hood ornament. Key to the front end look of a neoclassical, large circular headlamps stuck out on independent stalks, surrounded by chromed housings.
Smaller driving lamps flanked the headlamps, also on stalks. Quad independent lamps meant the Blackhawk’s front end had a lot of visual confusion to it. All front lighting was mounted on an extension of the bumper. The bumper had its own chrome lip that met with the grille surround in the middle. The overall front-end look with regard to the lighting was not all that different from the setup on the 1961 Imperial. Exner was pretty stuck on that idea.
Long front fenders flowed down from the A-pillar and extended past where they technically should have ended. There was a pointed overhang at both front corners, as the fender acted as a small roof over the driving lamps. (Worth noting, the driving lamps were absent on some examples, replaced by lamps under the bumper.) A chrome trim strip began at the outside edge of the grille and wrapped around the pointed fender. Additional chrome trim was found in the middle of the window, which was split into two pieces – a feature that existed only in 1971.
The chrome around the front overhangs headed down along the fender and continued to where it met the middle portion of the rear tire. At the front crease of the door, the chrome extended outward as a new character line grew to the rear tire. From there it bent upward around the rear wheel wells, and on to the sloped rear end.
The effect of the chrome strip was to give the appearance of separate fenders, as that particular cue of neoclassical was not physically present on the Blackhawk. One feature that did make the final design cut was a large chrome exhaust tube that exited the lower front fender on either side and extended under the rocker panel. Said exhaust was sometimes functional, other times not. Some examples also reflected dual chrome exhausts that exited from the rear end.
The chrome trim along the flanks drew the eye along the Blackhawk and distracted from the unusual door handle that was chrome and rear-hinged. It also distracted from the super formal roof, which was painted rather than covered in vinyl on the Blackhawk. A thick B-pillar wrapped around to a shrunken rear window. Beneath that window was the very sloped rear end, with an unusual trunk lid formed around an exposed rear tire. The tire placement was one typically covered by a continental kit, but the rubber was left exposed for the sake of visual interest and sportiness. The wheels on all five tires were a five-spoke slot alloy design that was unique to the Stutz.
The aforementioned character line chrome continued at the rear of the Blackhawk and extended around the tire to form a complete perimeter loop. Rear fenders implemented overhangs that mirrored the front and came to a rounded point. Unusually, the Blackhawk had no bumper: The lower portion of the rear fenders ended in a chrome cap on either side, with an integrated red parking lamp. Brake lamps were via simple circular red and amber units much like on the Lancia Stratos. Reverse lamps looked like an afterthought and were simple clear units fastened below either side of the exposed rear tire.
The Exner design debuted in January of 1970 at the Waldorf Astoria hotel in New York City. Unlike the concept that was constructed by Ghia, the production Blackhawk was initially built by Carrozzeria Padane. Panels were handmade, and the entire body was built of a thick, heavy-gauge steel. The artisans at Padane applied between 18 and 22 coats of paint to the Blackhawk for a superior finish. Each coat was hand-rubbed. Painting each Blackhawk took about six weeks.
The coupe spanned over 19 feet long once the body panels of the grandiose Exner design were applied. Even though it had a custom body, the resemblance to a Grand Prix was not a coincidence: When the Blackhawk debuted, it rode on the mid-size rear-drive G-body platform of the 1969 to 1972 Grand Prix. For reference, the Stutz with its graceful design was about a foot and a half longer than the Grand Prix.
Much like Exner’s later works at Chrysler, the Blackhawk’s looks were a bit extreme. But they fit into the neoclassical design trend just fine and did so in an accessible way with common GM underpinnings. Next time we’ll step inside the Blackhawk and take a look at the intensely luxurious interior, and learn about the big power underneath.
[Images: Stutz, Ghia, YouTube]
Latest Car ReviewsRead more
Latest Product ReviewsRead more
- Bryan Raab Davis I briefly dated an Australian fellow who was mad for Aspires; one of his better characteristics, if I’m honest.
- ToolGuy Check out Ferrari's market cap:https://companiesmarketcap.com/automakers/largest-automakers-by-market-cap/
- ToolGuy • Not sure who you get when you call the "Company phone" number listed on the recall report, but confident that it ISN'T Ferrari (someone either screwed up or made a conscious exception; recall might need a recall; where is my excellence in government that all of you are funding?).• 99% of them are fine.• On later models, additionally, a message will also appear on the vehicle’s dashboard that reads as follows: “Brake fluid level low, Go to dealer slowly”. That right there is classic.• Anyway, this is what happens when you build to a price point... (ba dum tsh!)
- Art Vandelay And what a giant pile of sh!t ths new format is. Great job guys, way to run off the last of the die hards.
- Theflyersfan If you ever want a review on a 2022 Mazda MX-5 GT RF, I'll be more than happy to type up a few thousand words and add in some great pictures in front of Churchill Downs for y'all!In a nutshell, I agree with this review. I didn't have a chance to try the Recaro seats because the only test drive available was with another GT that someone backed out in buying so it was being used as a demo. But from what I was told, if you're larger than a 38 waist or taller than 5'10", it gets tight. But with the standard seats, and I'm 5'10" and maybe 20 pounds from the 38 waist, I fit fine. Now getting in and out with the roof up after shoulder surgery (especially leaving the surgery center with most of the right arm under a nerve block) is the total opposite of graceful!!! The look on the nurse's face when the MX-5 pulled up and I'm partially wrapped up like a mummy was priceless.I've had mine since the middle of April and have already put 6,700 miles on it, including round trips from Louisville to Chicago and the Philadelphia suburbs. Averaged 38-39 mpg at a steady 75 mph, and it wasn't a torture chamber. The metal top helped a lot. The standard seats are a bit thin on padding, and there was a bit of squirming by around hour 8 on the Philly drive, but it's possible. But even though this design was released in 2015, I still get compliments from total strangers at stoplights, carwashes, gas stations, restaurants, etc. The Soul Red Metallic paint just makes the car pop. I wish it was available with the Terra Cotta leather (the gray above is available with it), and that it didn't have the standard all in black, because it gets thermonuclear in there with the top down and the sun beating on you, but a minor quibble. But it's just fun. Pure driving fun. The best stick shift in any car today. Solid brakes, excellent handling, a sane amount of power to where you aren't going to get into anything reckless and stupid. After a 12+ hour day at work, there's nothing better than dropping the top and driving the 20 minutes home with the better than I thought it would be Bose stereo playing Moby into my ears through the headrest speakers. Mazda has already announced there will be an NE model so I can't wait for that. It'll be interesting how they will keep the weight down with the expected changes to eke more MPG out of what is already an efficient car.