European Truck Manufacturers Ending ICE Production in 2040

Matt Posky
by Matt Posky

An alliance of European truck manufacturers have pledged to stop selling vehicles that produce any emissions by 2040 — pushing up its previous target date by a full decade.

The group, which includes Daimler, Scania, Man, Volvo, Daf, Iveco, and Ford, have all signed a pledge to focus on developing hydrogen and battery technologies so that petroleum-derived propulsion can be phased out of the trucking industry.

Up until recently, the world’s relationship with the internal combustion engine has been reminiscent of the scene in every movie where the villain is too busy explaining the plan to effectively execute one. The gasoline motor is strapped to the table while a coalition of corporate executives, environmental activists, and politicians explain their over-complicated plan for eliminating it. In their grandstanding, they failed to realize that double-o-combustion has slipped away and are forced to revise the plan and re-synchronize their watches.

It’s one reason you see such extreme environmental measures receive hard targets that are never met and immediately recycled once the industry is sure everyone’s forgotten. Part of this is our fault, too. We’ve gotten wise to the empty promises the automotive sector seems contractually obligated to make and simply shrug our shoulders whenever we hear corporate commitments.

But now the industry actually sees an opportunity to profit off EVs by digitizing the automobile and leveraging the increased amount of control that brings. Once cars are electric, automakers can more easily control the data they produce, adopt new subscription models for features, and even build their own proprietary charging networks. That, in addition to massive financial investments into firms pushing new technologies, have made electrification look far more appetizing to the industry — especially since the alternative is often a sizable fine for not complying with ever-expanding emission regulations.

Europe’s truck-producing manufacturers are acting under the European Automobile Manufacturers Association (ACEA) and are reportedly working with the Potsdam Institute for Climate Impact Research to decide which programs should be funded. The industry will spend about €50-100 billion on new technologies, Scania chief executive Henrik Henriksson told the Financial Times ahead of the pledge announcement.

From FT:

The pledge signed by the chief executives of the [semi] truck and van businesses also calls for widespread investment in energy grids and a higher tax on carbon across Europe to help drive the change.

“If we can make this happen, we need to work all together,” said Mr Henriksson, who chairs ACEA’s commercial vehicle board.

The pledge comes as European regulators and governments seek to phase out emissions from road transport.

The EU plans to reduce CO2 emissions by 50 per cent by the end of the decade.

The UK has said it will end the sale of new petrol and diesel cars including hybrids by 2035, and will consult on trying to end the use of diesel [trucks].

“[Freight deliveries are] the backbone of any society in the world today, but we have to recognise that they are very dependent on the internal combustion engines to transport all the goods of every industry,” said Professor Johan Rockström, director of the Potsdam Institute.

[Image: Volvo Trucks]

Matt Posky
Matt Posky

A staunch consumer advocate tracking industry trends and regulation. Before joining TTAC, Matt spent a decade working for marketing and research firms based in NYC. Clients included several of the world’s largest automakers, global tire brands, and aftermarket part suppliers. Dissatisfied with the corporate world and resentful of having to wear suits everyday, he pivoted to writing about cars. Since then, that man has become an ardent supporter of the right-to-repair movement, been interviewed on the auto industry by national radio broadcasts, driven more rental cars than anyone ever should, participated in amateur rallying events, and received the requisite minimum training as sanctioned by the SCCA. Handy with a wrench, Matt grew up surrounded by Detroit auto workers and managed to get a pizza delivery job before he was legally eligible. He later found himself driving box trucks through Manhattan, guaranteeing future sympathy for actual truckers. He continues to conduct research pertaining to the automotive sector as an independent contractor and has since moved back to his native Michigan, closer to where the cars are born. A contrarian, Matt claims to prefer understeer — stating that front and all-wheel drive vehicles cater best to his driving style.

More by Matt Posky

Comments
Join the conversation
7 of 28 comments
  • Chuckrs Chuckrs on Dec 15, 2020

    Hydrogen, chemical batteries and solid state batteries share one characteristic. They are means of storing energy. If you have a wholesale switch, where will the extra energy required originate?

    • RHD RHD on Dec 17, 2020

      We'll fill up with Coronavirus concentrate, and burn that to get around.

  • Markf Markf on Dec 15, 2020

    All these "pacts" and predictions are always made just far enough in the future (10-20 years) that people will completely forgot about them when they are not met or don't come true. It makes the companies feel virtuous and satisfies the gov regulators and enviro lobbyist but in 2040 we all know trucks will still be burning diesel

    • See 3 previous
    • Inside Looking Out Inside Looking Out on Dec 15, 2020

      @Old_WRX You Samsung TV and laptop and phone already do that.

  • Dr.Nick What about Infiniti? Some of those cars might be interesting, whereas not much at Nissan interest me other than the Z which is probably big bucks.
  • Dave Holzman My '08 Civic (stick, 159k on the clock) is my favorite car that I've ever owned. If I had to choose between the current Civic and Corolla, I'd test drive 'em (with stick), and see how they felt. But I'd be approaching this choice partial to the Civic. I would not want any sort of automatic transmission, or the turbo engine.
  • Merc190 I would say Civic Si all the way if it still revved to 8300 rpm with no turbo. But nowadays I would pick the Corolla because I think they have a more clear idea on their respective models identity and mission. I also believe Toyota has a higher standard for quality.
  • Dave Holzman I think we're mixing up a few things here. I won't swear to it, but I'd be damned surprised if they were putting fire retardant in the seats of any cars from the '50s, or even the '60s. I can't quite conjure up the new car smell of the '57 Chevy my parents bought on October 17th of that year... but I could do so--vividly--until the last five years or so. I loved that scent, and when I smelled it, I could see the snow on Hollis Street in Cambridge Mass, as one or the other parent got ready to drive me to nursery school, and I could remember staring up at the sky on Christmas Eve, 1957, wondering if I might see Santa Claus flying overhead in his sleigh. No, I don't think the fire retardant on the foam in the seats of 21st (and maybe late 20th) century cars has anything to do with new car smell. (That doesn't mean new car small lacked toxicity--it probably had some.)
  • ToolGuy Is this a website or a podcast with homework? You want me to answer the QOTD before I listen to the podcast? Last time I worked on one of our vehicles (2010 RAV4 2.5L L4) was this past week -- replaced the right front passenger window regulator (only problem turned out to be two loose screws, but went ahead and installed the new part), replaced a bulb in the dash, finally ordered new upper dash finishers (non-OEM) because I cracked one of them ~2 years ago.Looked at the mileage (157K) and scratched my head and proactively ordered plugs, coils, PCV valve, air filter and a spare oil filter, plus a new oil filter housing (for the weirdo cartridge-type filter). Those might go in tomorrow. Is this interesting to you? It ain't that interesting to me. 😉The more intriguing part to me, is I have noticed some 'blowby' (but is it) when the oil filler cap is removed which I don't think was there before. But of course I'm old and forgetful. Is it worth doing a compression test? Leakdown test? Perhaps if a guy were already replacing the plugs...
Next