Ditch That Slant Six: Dodge Hellcat Powerplant Is Now Available as a Crate Engine

by Steph Willems

Published: October 30th, 2017

ditch that slant six dodge hellcat powerplant is now available as a crate engine

This should lead to more than a few odd pairings. Mopar, Fiat Chrysler Automobiles’ performance and aftermarket parts division, will now offer a Dodge SRT Hellcat engine — the company’s 707 horsepower, supercharged 6.2-liter V8 — minus the car.

Dubbed the “Hellcrate,” the warranty-backed engine and associated kit was unveiled Monday ahead of this week’s SEMA show in Las Vegas. This means Mopar fans looking to own a 707-hp beast have other options than just visiting an FCA dealer and signing on the dotted line for a new vehicle.

The move is apparently the result of many impassioned pleas from loyal fans.

“Never before has a supercharged, factory-direct 707-horsepower crate engine kit been offered, and we are proud to be the first to deliver a solution enthusiasts have demanded,” said Pietro Gorlier, head of parts and service for Mopar, said in a statement. “This ultimate powertrain option fits the needs of owners and fans who demand iconic performance.”

Uh oh, there’s that word “iconic” again. Does FCA have a trademark on it? Joking aside, the news is a big deal for owners of vintage muscle cars who aren’t satisfied with the status quo.

Buyers of the crate engine will have 707 hp and 650 lb-ft delivered to their door, but they’ll also require the Hellcrate engine kit, which includes a powertrain control module (PCM), power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. For owners of vehicles built before 1976, Mopar will offer a Front End Accessory Drive Kit, bringing an alternator and power steering pump to the mix, along with belts, pulleys and other essentials.

When purchased together, the crate engine and engine kit comes with a three-year, unlimited mileage warranty from Mopar. Not surprisingly, it doesn’t come cheap. The engine alone carries an MSRP of $19,530, which is over $3,000 more than a 640 hp GM LT4 crate engine. The engine kit, which you’ll need, is another $2,195.

Still, when considering the engine’s brand-new condition and the peace of mind from the factory warranty, it’s a relative bargain compared to motors pulled from wrecked vehicles. Used Hellcat engine prices have reached $25,000 in the past.

Of course, putting all that power to the rear wheels of God-knows-what means having a transmission capable of withstanding it, and for this role Mopar prescribes a manual. Specifically, the brand’s Tremec Magnum transmission kit, a to-order version of the one you’ll find in a factory Hellcat.

Mopar claims there’ll be another interesting bit of product news announced Tuesday afternoon. We’ll keep you posted if it turns out to be something worthwhile.

[Image: Fiat Chrysler Automobiles]

#Aftermarket #CrateEngines #Engines #Fca #FiatChryslerAutomobiles #Hellcat #Hellcrate #Tuners

Steph Willems

More by Steph Willems

Comments

Join the conversation

3 of 26 comments

Lou_BC on Oct 30, 2017

Hellcrate Ram pickup.

Like Reply
Richard Gaskill on Oct 31, 2017

The Hellcat is only suitable for drag cars or show cars. You can't just"ditch a slant 6" and drop in over 700 hp without major suspension modifications. Enough Hellcats have been wrecked to prove that even with a new factory suspension many drivers are incapable of controlling the car.

Like Reply
- Manta9527 on Nov 06, 2017
  
  Plum Floored Creations has already performed a Hellcat motor swap with a 2012 Dodge Durango and True Street Performance did something similar with a Jeep Grand Cherokee, both of which are used as daily drivers, so some people might not see the Hellcat as only suitable for drag cars or show cars. Besides, I suspect those vintage Mopar owners who really want to use a Hellcrate engine will hardly be intimidated by the idea of suspension modifications.
  
  Like

Recent Comments

TheEndlessEnigma These cars were bought and hooned. This is a bomb waiting to go off in an owner's driveway.
Kwik_Shift_Pro4X Thankfully I don't have to deal with GDI issues in my Frontier. These cleaners should do well for me if I win.
Theflyersfan Serious answer time...Honda used to stand for excellence in auto engineering. Their first main claim to fame was the CVCC (we don't need a catalytic converter!) engine and it sent from there. Their suspensions, their VTEC engines, slick manual transmissions, even a stowing minivan seat, all theirs. But I think they've been coasting a bit lately. Yes, the Civic Type-R has a powerful small engine, but the Honda of old would have found a way to get more revs out of it and make it feel like an i-VTEC engine of old instead of any old turbo engine that can be found in a multitude of performance small cars. Their 1.5L turbo-4...well...have they ever figured out the oil dilution problems? Very un-Honda-like. Paint issues that still linger. Cheaper feeling interior trim. All things that fly in the face of what Honda once was. The only thing that they seem to have kept have been the sales staff that treat you with utter contempt for daring to walk into their inner sanctum and wanting a deal on something that isn't a bare-bones CR-V. So Honda, beat the rest of your Japanese and Korean rivals, and plug-in hybridize everything. If you want a relatively (in an engineering way) easy way to get ahead of the curve, raise the CAFE score, and have a major point to advertise, and be able to sell to those who can't plug in easily, sell them on something that will get, for example, 35% better mileage, plug in when you get a chance, and drives like a Honda. Bring back some of the engineering skills that Honda once stood for. And then start introducing a portfolio of EVs once people are more comfortable with the idea of plugging in. People seeing that they can easily use an EV for their daily errands with the gas engine never starting will eventually sell them on a future EV because that range anxiety will be lessened. The all EV leap is still a bridge too far, especially as recent sales numbers have shown. Baby steps. That's how you win people over.
Theflyersfan If this saves (or delays) an expensive carbon brushing off of the valves down the road, I'll take a case. I understand that can be a very expensive bit of scheduled maintenance.
Zipper69 A Mini should have 2 doors and 4 cylinders and tires the size of dinner plates.All else is puffery.