Vellum Venom Vignette: Flattened Fenders and Air Curtains

Sajeev Mehta
by Sajeev Mehta

Mike writes:

Sajeev,

I have noticed something on newer cars, and it’s been bothering me for awhile now. Perhaps you, with your deity-like omniscience (and access to inside information) will be able to provide some clarity.

As you can see from the picture below, a new Toyota has this vertical flat area around the wheels. And it’s not just this particular model of car — nearly every modern car I see on the road today has a similar design feature, though they vary in the width of the flat area around the wheel arch. Contrast this the Clinton-era Toyo at the bottom, where the body lines follow a graceful curve all the way to the fender opening.

To my eye, the wheel arch flatness looks terrible. Are every automaker’s designers on the same drugs, or is this done for an actual reason — i.e, aerodynamics, or possibly to make the wheels appear larger (another trend which befuddles me)?

Looking forward to your reply, thank you!

Sajeev answers:

Access to inside information in the car design biz? Deity-like omniscience? Hardly. I contacted two experts in aerodynamics and neither responded. Even worse, one is a longtime family friend.

Aesthetically speaking: I agree. The flattened fender arches add an unnecessarily complex or flow-killing stylistic element to a vehicle’s bodyside.

Realistically speaking: The hard transition provides an aero benefit I cannot independently verify. I reckon it reduces drag and/or turbulence around the wheels, especially when adding air curtains. The two might combine to “clean up” (technical term) airflow around the front wheels. Which implies your ride gets quieter and more fuel efficient — not just for fancy BMWs, but also for the Ford F-150 and Mustang.

Which begs the question, how much does this really help? Bullet-nosed faces of the 1990s are history and we still have pedestrian-friendly fronts with extensive amounts of frontal area. Perhaps that’s why air curtains are necessary: every little bit helps.

If you’re a Car Design Wonk, please chime in below or drop me an email.

[Image: BMW, the OP, Ford]

Send your queries to sajeev@thetruthaboutcars.com. Spare no details and ask for a speedy resolution if you’re in a hurry…but be realistic, and use your make/model specific forums instead of TTAC for more timely advice.

Sajeev Mehta
Sajeev Mehta

More by Sajeev Mehta

Comments
Join the conversation
2 of 39 comments
  • V-Strom rider V-Strom rider on May 28, 2017

    My M235i has them - my least favourite part of an otherwise beautiful car.

  • Lightspeed Lightspeed on May 30, 2017

    Truly hate those flat arches, one reason I love my 2000 Lexus GS, it has box-flares! real, live box-flares! Todays cars are nearly indistinguishable from one another and the interiors even more so. The designers today strike me as being more interested in anime and comic books than in cars, hence cars and trucks becoming so cartoonish. I drove a Lexus NX loaner a few weeks ago and was embarrassed to seen in the thing, and not even because of the grille, but because of the giant flat wheel arches.

  • Alan Years ago Jack Baruth held a "competition" for a piece from the B&B on the oddest pickup story (or something like that). I think 5 people were awarded the prizes.I never received mine, something about being in Australia. If TTAC is global how do you offer prizes to those overseas or are we omitted on the sly from competing?In the end I lost significant respect for Baruth.
  • Alan My view is there are good vehicles from most manufacturers that are worth looking at second hand.I can tell you I don't recommend anything from the Chrysler/Jeep/Fiat/etc gene pool. Toyotas are overly expensive second hand for what they offer, but they seem to be reliable enough.I have a friend who swears by secondhand Subarus and so far he seems to not have had too many issue.As Lou stated many utes, pickups and real SUVs (4x4) seem quite good.
  • 28-Cars-Later So is there some kind of undiagnosed disease where every rando thinks their POS is actually valuable?83K miles Ok.new valve cover gasket.Eh, it happens with age. spark plugsOkay, we probably had to be kewl and put in aftermarket iridium plugs, because EVO.new catalytic converterUh, yeah that's bad at 80Kish. Auto tranny failing. From the ad: the SST fails in one of the following ways:Clutch slip has turned into; multiple codes being thrown, shifting a gear or 2 in manual mode (2-3 or 2-4), and limp mode.Codes include: P2733 P2809 P183D P1871Ok that's really bad. So between this and the cat it suggests to me someone jacked up the car real good hooning it, because EVO, and since its not a Toyota it doesn't respond well to hard abuse over time.$20,000, what? Pesos? Zimbabwe Dollars?Try $2,000 USD pal. You're fracked dude, park it in da hood and leave the keys in it.BONUS: Comment in the ad: GLWS but I highly doubt you get any action on this car what so ever at that price with the SST on its way out. That trans can be $10k + to repair.
  • 28-Cars-Later Actually Honda seems to have a brilliant mid to long term strategy which I can sum up in one word: tariffs.-BEV sales wane in the US, however they will sell in Europe (and sales will probably increase in Canada depending on how their government proceeds). -The EU Politburo and Canada concluded a trade treaty in 2017, and as of 2024 99% of all tariffs have been eliminated.-Trump in 2018 threatened a 25% tariff on European imported cars in the US and such rhetoric would likely come again should there be an actual election. -By building in Canada, product can still be sold in the US tariff free though USMCA/NAFTA II but it should allow Honda tariff free access to European markets.-However if the product were built in Marysville it could end up subject to tit-for-tat tariff depending on which junta is running the US in 2025. -Profitability on BEV has already been a variable to put it mildly, but to take on a 25% tariff to all of your product effectively shuts you out of that market.
  • Lou_BC Actuality a very reasonable question.
Next