#hydraulic

It wouldn’t be a supercar without some risk of getting burnt. Those performance limits are far beyond the capabilities of most owners, after all.

This time, however, the threat of conflagration is real.

According to Ford, certain copies of the GT run the risk of dribbling hydraulic fluid from the lines feeding its adjustable rear spoiler. Since the car’s centrally-mounted exhaust tips are located in close proximity, this problem could set the whole works ablaze.

TTAC Commentator jrominski writes:

Nice to see you are still at it on TTAC. (Back at it?)

So my story is a 2010 Audi A4, Quattro 2.0t Premium. Red, as it should be (No, it should be brown. Duh. – SM). Just turning 60k miles. The engine is an EA888 according to Wikipedia, twin chain driven counterbalance shafts as is known to work so well on I4s. Production commenced 2008 and its in all US A4 B8s with the 2.0 gas engine. Inside oil cap the gallery is clean as can be, I keep the VW spec Mobil 1 changed with my mityvac. New plugs, NGK of correct part number, air cleaner path is fine. The rest is original unmolested.

The issue is it runs rough. Slightly, as in the car does not shake but I feel it. Worst, dead cold, running at just above idle up a slight incline. A miss. Since 25k. Goes mostly away when warm or when power is asked for. No codes. Sort of feels like a tire flat spot but it did not go away with new tires.