#Transaxle

Eric writes:

I have a 2000 Maxima with about 155k on the clock. I purchased this car in Los Angeles and since 2005, it’s lived in Ohio and Pennsylvania. The main issue is that I can tell the transmission is starting to get a bit soft on the 1-2 upshift, specifically once it starts getting cold out. I presume the primary reason for this is the abuse it’s suffered at my hands. As it was a California car, it has no traction control and though I love it nine months of the year, it is utterly helpless in the snow—snow tires didn’t seem to help tremendously. I’ve had to rock myself out a number of times and I presume the trans has gotten overheated at least once. I’ve been good about changing the fluid (drain and fill 3x, filter too) about once a year but I think I’m near the end on this trans.

Chris writes:

Dear Sajeev,

Love the website and love your reading your column. My question is I am looking to get a minivan within the next 6 months to a year. I am only looking to spend around 8 grand on one. I am leaning heavily towards Chrysler’s vans, and found some really great deals on older ones with low miles. But then I read your article about how it’s not always good to go with older, low mile automobiles. So would I be better to get say, a 2002 model Town and Country, with a little over 100 hundred thousand miles? Or should I not even bother with Chrysler at all? I was leaning towards a Windstar as well, but then there’s that whole rear axle breaking thing, and I quite enjoy living. In your personal opinion what is the best minivan for my budget.

It actually comes with a little book too!

Patrick writes:

Hi Sajeev,

Avid daily reader of the site but infrequent commenter… Pony Cars and old Volvos sometimes drag me out of my shell but I have a couple questions about my wife’s car and I wanted to see what you and others might think.

We’ve got a 2007 3.5L Impala with 60,000 miles on it and it is due for an oil change and checkup:

Jackson writes:

I own a 2001 Nissan Maxima and a 2006 Corvette, both purchased new w/cash. I know the Maxima with 105,000+ miles has had two ATF services, which included the “dreaded ATF Flush”. So far the thing keeps running, only issue (unrelated) was a Cat replacement (99,000) and 3 O2 sensors around the same time.

The 2006 Corvette at 5 years and 42,600 miles is due for a coolant service and I see that the ATF service is 50,000 (harsh) or 100,000 (normal). So far expenses have been limited to gas, once a year oil changes and a set of tires at 26,000 due to some aggressive driving, aggressive factory camber settings and a shard of metal. It’s been spotless so far besides a squeaky roof panel which has been solved by periodic application of Super Lube to some contact points. Should I do an ATF flush for the vette? It would be a BG machine. It’s a warm weather commuter for me (42 miles round trip per day of which 26 is highway miles on which avg. speed 75 mph which is just 3 days a week).

I have taken it on 6 long trips over the years as well as weekend cruises. I do use the paddles about 30% of the time, but do not really hoon it so much the past 2 years after getting 3 speeding tickets in 6 month period…which I fought and is another subject. So please advise.

Chuck writes:

My son enjoys being able to spread out when driving and also appreciates the convenience of hauling several of his buds around. He drives a 2001 Cadillac DHS. He has just moved to Massachusetts and registered the car there. It failed inspection with OBD codes P1860 and P0741. He has 60 days to resolve the problem. A little internet searching informs that these codes are related to the torque converter clutch circuit and the solenoid valve.

The codes may indicate anything from a bad electrical connection to a failed plastic solenoid (I hate plastic) to a worn TC clutch. Other than the not so likely electrical connection fix, labor is at least 12 hours, even for the solenoid. I don’t see this as an emissions or safety issue, but then I’m not the state of Massachusetts.

TTAC Commentator Silent Ricochet writes:

Hey Sajeev, it’s been a long time since I sent my first email about my 2002 Cavalier Z24 making rattling noises at low RPM. The noise has since then gotten slightly more noticeable and I finally decided to take some action and really look into it. As a quick refresher, in First and Second gear, between 1500 and 2000RPM under moderate throttle, the car will make an awful rattling noise, like that of pennies in a coffee can kind of noise.

After looking at several cavalier and J-Body forums I stumbled upon a ridiculously popular thread that contained all the information I would ever need…