#Reproduction

Jaguar has announced the D-Type is re-entering production this week, part of a “once-in-a-lifetime project” designed to get 25 examples of the iconic racer back on the streets. While it’s always exciting to see a venerable model resurface after a six-decade absence, this is nothing new for Jaguar. The company did a limited continuation of the E-Type coupe in 2015, the XKSS in 2016, and a singular electric-powered E-Type prototype in 2017.

That means the “new” D-Type is just another entry in Jaguar Classic’s ultra-premium heritage collection. However, this does not mean the continuation cars aren’t any less cool than a penguin perched atop a glacier adjusting his brand-name sunglasses.

I thought I would give everyone an update on the lighting situation on the Durango. After considering the advice from both you and Mr. Stern, I decided that after all the expense of the new OEM lights, the better bulbs and the relay harness, I would just go with the more labor-intensive lights and less labor-intensive wiring from The Retrofit Source. I ended up spending a little over my budget but the lights are worlds better. They’re also an engineered solution that doesn’t blind other drivers.

I made an album with several pictures, before and after, with different settings. As you can see, on the new set there is a distinct cutoff on the “dims.” The low beams are currently adjusted a bit low and I haven’t taken the time to fix that yet, but on the road it is a major improvement. Other than a confused look from my wife when I had to bake the headlight buckets to remove the lenses and finding a place for the computer, ballast, and relay, it wasn’t too bad.

It was a little more work than I had planned, but the all-in price wasn’t much more than going the OEM route. It is a very significant improvement. I did get to adjust them a bit, and then followed my brother-in-law to see if they were blinding everyone. He said it was no different than other traffic, so I think I will leave the alignment right there. The beans line up on the door with the dims slightly higher than the other lights, but the old lights were sort of a blob on the top and I used a guess as to where the “cut” line was.

Thanks for all the help. I wanted to do it right and have them be able to align correctly. Even though I didn’t follow your exact advice, you gave me the push in the right direction. It still isn’t a bad looking truck for 190k miles!

Sajeev writes:

I created Piston Slap as a way to bring the diverse knowledge base of your favorite car forum to the autoblogosphere with easy to digest weekly posts. The only problem is when a mistake gets published, the thread never comes back to page one with its correction.

I screwed up, so here I’ll do my best to fix it: I was mistaken about aftermarket DOT/SAE approved lights being just as good or better than original-equipment factory parts. Some of the aftermarket parts are promoted as being “CAPA certified” (Certified Automotive Parts Association), but as we shall see, that doesn’t mean what it sounds like, and it doesn’t help with our reader’s query that started the conversation in the first place. As seen elsewhere, parts not up to spec can have tragic consequences with little recourse for victims.

When fire destroyed Jaguar’s Browns Lane plant on Feb. 12, 1957, nine of the 25 existing XKSS models were consumed by flames. The spartan roadster — a road going version of the famous D-type race car — went on to become a legend and the remaining 16 examples are among the most valuable collector cars on the market.

Now, the lost nine are going to rise from the ashes, as Jaguar plans to use their serial numbers on a limited run of exact replicas, mirroring last year’s E-type Lightweight.

Sajeev writes:

In our last installment of this particular ‘slap, a reader had a question about aftermarket wheels. The solution was rather simple, the wheels discussed were not hub-centric. But I also mentioned a horrible “death wobble” problem with my aftermarket reproduction SVT Cobra wheels on my Fox Cougar, solution TBD. It was a big problem until…

Hey Sajeev,

A long time (since roughtly 2006ish) TTAC reader, I thought you might be able to help me out a bit, or point me in the right direction. My car (2007 Honda Civic Si Sedan, 17300 miles when bought used off lease, now currently around 39000 miles) vibrates terribly at highway speed. Starts around 55mph, continues to increase until about 80-85 where it begins to smooth out again.