#Cord812

DAG writes:

Why don’t automakers design front-wheel-drive cars with the transaxle in front of the engine? This moves the front wheels forward and improves weight distribution; offers better potential for aerodynamics and leaves space under the hood for pedestrian protection. With a turbo four-cylinder, the engine could have clearance from the firewall. Also, the engine and transaxle could be mounted on a pivoting subframe, hinged at the front, to drop down at the back for major maintenance; disconnect steering and exhaust to drop cradle.

The engine would sit in the space where rack and pinion generally resides; steering gear design would be a challenge for direct mechanical actuation. Perhaps traction would be reduced. Would crashworthiness also be affected?

There have been lots of Batmobiles since Batman first appeared in print in 1939. In addition to the comic books, starting in the 1940s there have been movie serials and feature films, as well as television shows both live action and animated. I suppose, based on the many replicas that have been made (enough for the rights to have been litigated) that the Adam West era Batmobile fabricated at the direction of George Barris is the most famous, and next in line would be the Batmobile from Tim Burton’s Batman Returns or the Tumbler from the Batman films directed by Christopher Nolan. The first Batmobile, or rather the first car called the Batmobile, is less well known. The term “Batmobile” first appeared in Detective Comics #48, in 1941 and has been attributed to writer Bob Finger. Batman’s car was described as a supercharged red roadster with a reinforced hood that could be used as a battering ram. Most online sources, including batmobilehistory.com and this popular infographic say that Batman artist Bob Kane based his drawing of that car on a 1937 Cord 812, but I’m convinced that while the Cord may have influenced Kane, so did a lesser known supercharged American car from the late 1930s, the Graham “Spirit of Motion”, also known as the Sharknose.