Piston Slap: An Exedy-ous From Logical Clutching?

James writes:

Hi Sajeev,

I’ve got a 2003 Impreza WRX (blob-eye) that’s covered 96,000 km now. I bought it two years ago from the original owner, who seemed to take very good care of the car (every receipt since new). The car has been almost faultless.

About 4,000 km ago, at 92,000 km, the original clutch was clearly on its last legs. Under wide open throttle in 3rd gear, the clutch would slip and struggle to get power down. So off it went to a local WRX specialist to have the clutch replaced with a new kit: new pressure plate, machined flywheel and new Exedy OEM (standard, not heavy duty) replacement clutch.

However, when I got the car back, it felt completely wrong.

Read more
Piston Slap: Start With Spark Plugs!

Done Duratec’d Out? (photo courtesy: Supaman)

TTAC Commentator Supaman writes:

Hi Sajeev,

Haven’t visited TTAC in a while but I’m back! My Mazda 6 has now crossed the 101k mileage marker and all your nuggets of wisdom have helped keep this classic functional and beautiful. However, there’s another problem rearing its head that has plagued even the Mazda forums I’ve visited for a resolution.

It involves the car’s driveability at anything below 3000 rpm. Doesn’t matter whether the engine is just warming up or at operational temperature, the car will hesitate (sometimes violently) in a stuttering/bucking fashion when accelerating from a stop through the gears until I crest that magic 3000 mark on the tach. Out on the highway, passing in top gear is almost impossible because of the engine’s hesitation if revs fall below that number, requiring a downshift to 4th to keep them up. At first I thought my manual skills were to question but then I never started experiencing this issue until around the 87,000 mile mark. It has since gotten worse. Sometimes the bucking is enough to trigger the CEL but then it always goes away after a while.

Browsing the forums I’ve tried everything from cleaning the MAF sensor, fuel injector cleaner, throttle body cleaning as well as replacing the O2 sensor. I’ve narrowed it down to either spark plugs (some forum members replaced theirs but the problem came back hours later), the coils or possibly a vacuum leak. One post I read indicated a potential cylinder misfire. Even Mazda dealers were confounded.

Read more
Piston Slap: Crystal Ballin' With Yo Tranny! (Part II)

Aaron writes:

Hey Sajeev,

Huge fan of TTAC and the piston slap articles. My problem is that I noticed my car(2007 honda civic)would shudder, under light throttle and low rpms especially when going up a slight slope. This usually happens at 30km/hr or 40km/hr. I took it to the honda dealer(4 months ago) and he said the torque converter(tc) needs to be replaced(300 for tc plus 900 for labour and stuff).

Read more
  • UnoGeeks Great information. Unogeeks is the top SAP ABAP Training Institute, which provides the best SAP ABAP Training
  • ToolGuy This thing here is interesting.For example, I can select "Historical" and "EV stock" and "Cars" and "USA" and see how many BEVs and PHEVs were on U.S. roads from 2010 to 2023."EV stock share" is also interesting. Or perhaps you prefer "EV sales share".If you are in the U.S., whatever you do, do not select "World" in the 'Region' dropdown. It might blow your small insular mind. 😉
  • ToolGuy This podcast was pretty interesting. I listened to it this morning, and now I am commenting. Listened to the podcast, now commenting on the podcast. See how this works? LOL.
  • VoGhost If you want this to succeed, enlarge the battery and make the vehicle in Spartanburg so you buyers get the $7,500 discount.
  • Jeff Look at the the 65 and 66 Pontiacs some of the most beautiful and well made Pontiacs. 66 Olds Toronado and 67 Cadillac Eldorado were beautiful as well. Mercury had some really nice looking cars during the 60s as well. The 69 thru 72 Grand Prix were nice along with the first generation of Monte Carlo 70 thru 72. Midsize GM cars were nice as well.The 69s were still good but the cheapening started in 68. Even the 70s GMs were good but fit and finish took a dive especially the interiors with more plastics and more shared interiors.