No Fixed Abode: Return Of The Max

“From each according to his ability, to each according to his needs.” It’s an old idea, but one that has increasing relevance in an era where automation is likely to permanently tilt the balance between capital and labor well off the scale. When all the jobs are done by robots, and the robots are owned by a small group of people, and there’s no way to earn enough money through labor to buy robot capital of your own, then won’t we have entered a stasis of sorts in society? And won’t the bolder thinkers among us then propose that the spoils of the robot labor be divided equally? And won’t they have a bit of a point?

There’s also the idea that if you have something that you don’t need, and someone else needs something that they don’t have, and the “something” in question is the same thing, that the reasonable thing to do is to hand that thing that you don’t need over to the someone who needs it. This was the argument I used in 1987 when my brother, known to all and sundry as “Bark M”, found himself in possession of a set of new Z-Mags thanks to our parents liking him best. He didn’t need another set of wheels, but I’d just broken my back wheel riding off a loading dock for no reason at all, so I requisitioned his Z-Mags for my own use. This was made easier by the fact that I was fifteen years old and he was nine. That’s another lesson: equitable redistribution usually requires unreasonable force.

So what does this have to do with the Nissan Maxima, recently summarized in these electronic pages?

Read more
Piston Slap: 4DSC Goes to Infiniti and Beyond?

T.J. writes:

Hey guys,

The day I knew was coming but hoped would never arrive is here. I have to decide whether its time to replace my trusty ride, a 1996 Infiniti I30 with estimated 235k miles (odo was broken years ago, repaired, and reset to a mileage amount we now think is low. actual miles is probably around 250-260k). The issue is an oil leak.

It’s now leaking at the rate of about 5 quarts every 3000 miles. I’ve been content to keep topping off the oil, but now the leak is causing other problems; specfically, the a/c and alternator belt will not stay on because the pulley is soaked in oil. Fixing the leak would be over $1000, and this would the third or so leak that we’ve plugged, only to have another pop up, so I’m convinced that if I was to fix it, a new engine is the way to go. I have an estimate from my mechanic (a very reasonable, trustworthy independent shop) for $2200 or so ($850 for a used local engine with 90k miles, $200 in other parts, and 13 hours labor).

Read more
Volkswagen's Winterkorn Rattled By Non-Rattling Hyundai I30 – This Could Cost Careers

At the Frankfurt Auto Show, when all the festivities and pageantry are over, it is customary to stroll through the booths, stands and halls of the competition to find out what they have. The real research is done by faceless drones that pose as journalists or customers. The drones must have brought back alarming intell to Halle 3, where Volkswagen holds court: “Ach du mein Lieber, Hyundai fielded a fearsome adversary to the Golf with the new i30.”

The whole white-haired Volkswagen board dropped their coffee cups and invaded the Hyundai display, led by Prof. Dr. Winterkorn, CEO of Volkswagen. Winterkorn himself sat behind the wheel of the i30. The former head of Quality Assurance was shocked:

Read more
  • Lorenzo I'd actually buy another Ford, if they'd bring back the butternut-squash color. Well, they actually called it sea foam green, but some cars had more green than others, and my 1968 Mercury Montego MX was one of the more-yellow, less-green models. The police always wrote 'yellow' on the ticket.
  • ToolGuy Some of my first cars were die-cast from pot-metal in 2 pieces: body-in-white plus chassis. I spray-painted some of them, the masking was a pain. The tires did burn realistically.
  • Vulpine Tesla has NOT said they're scrapping the Gigacasting process, but they have also said they wouldn't cast a one-piece body. The concept is to have a total of 5 main pieces: Nose clip, tail clip, 2 sides and belly. They're already using the first two and the sides are not necessarily going to be castings. The belly casting, however, is being delayed as the battery technologies are changing far too quickly to lock into any one fixed design as the battery packs themselves are currently consisting of at least three different types based on the cells being used within them. It's a matter of convenience for the company to let the technologies stabilize somewhat before locking in on a specific design.
  • MaintenanceCosts I've never prioritized color when looking for a car, but there are usually some colors (particularly bright reds and refrigerator whites) that I just won't accept.That said, one of my cars gets parked outside in a city environment, and it's silver, and that's good because silver does not complain too much when oxidized to he!l. The brown BMW is neat because there aren't many brown BMWs, and the green Legend is historically correct because the mid-'90s meant green.
  • ToolGuy • Black vehicles and dark interiors burn more petrol and are bad for the planet (look it up, I'm not gonna hold your hand on this one lol).• If your current vehicle was new when you took delivery, and you didn't get EXACTLY the color you wanted (blithely accepted what was foisted on you by the dealer), shame on you. You are the problem with today's franchise system. In future, please notify the dealer that your policy is to collect a Non-First-Choice Paint Upcharge in such a circumstance. I recommend $1200.• Also, fine-thread drywall screws (in wood) waste electricity (and time). When I am President of the Universe, fine-thread drywall screws will be banned in favor of the more environmentally- and wallet-friendly coarse-thread variety. (Again, you can work out the reasons but I am absolutely correct.)