#SlaveCylinder

TTAC commentator krhodes1 writes:

Hi Sajeev,

Here is one for you and the B&B: ’74 (more or less) Triumph Spitfire with a clutch issue. The clutch feels “sticky”, doesn’t release smoothly, and makes starting off in first a little challenging. Otherwise, the clutch works fine once you are moving.

dane writes:

My 1999 Ford Ranger XLT is starting to come under some serious wear. I got it a while back and thought it was good enough, an upgrade considering my dog grew to be 70 lbs and didn’t fit into the back of my immaculate 1996 Acura Integra hatchback. I needed to upgrade in size so I did.

Now, this truck came with a few ridiculous caveats. With 140k on the clock, it’s starting to enter my personal danger zone for cars. Additionally, it had a big tow package on it, a 2 inch body lift and big 33” by 12.5” tires on it. Did I mention it has the smallest 3.0 V6? The previous owner did not regear the truck and therefore it’s a bit sluggish. Upon inspection of the truck after removing the bumpers, which were improperly re-installed after the body lift, it looks like whoever did the lift cut parts of the frame near the rear of the truck. It’s looking worse and worse.