Piston Slap: The Importance of A Craigslist 3-Ring Binder

TTAC commentator dtremit writes:

Hey Sajeev —

Inspired by your recent Mazda3 Piston Slap, I thought I’d throw this question your way. Seems like something the B&B might have advice on.

I have a 2005 Mazda6 that is a rather desirable used car…on paper. It is in excellent condition mechanically, and has fairly low miles for its age (about 78k). Single owner, and I have maintained it well, though I am not sure the mess of receipts in the glovebox counts as excellent documentation. I have a good set of Nokian snow tires for it on steel wheels, which would go along with it. It would make a good car for someone for quite some time to come.

Read more
Piston Slap: Run Flat Tires and Parties A, B, C

TTAC commentator WheelMcCoy writes:

Hi Sajeev,

With MINIs, fun is directly proportional to repair bills. A couple with a 2009 MINI Cooper S bought an extended warranty which expires in February 2015. They hope to sell their MINI around then, but the run flat tires are worn down to their wear bars. To tide them over for 6 or 7 months, I suggested they buy some good handling low tread wear all season tires (they are in the Northeast) and an air compressor with goo. With normal tires, I’d argue they’d enjoy their MINI even more and might even want keep it after the extended warranty. But they are inclined on getting expensive run-flats to not hurt the resale value. Most likely, they will trade-in rather than sell on their own.

Appreciate your input and any alternatives we haven’t considered.

Read more
  • Dr.Nick What about Infiniti? Some of those cars might be interesting, whereas not much at Nissan interest me other than the Z which is probably big bucks.
  • Dave Holzman My '08 Civic (stick, 159k on the clock) is my favorite car that I've ever owned. If I had to choose between the current Civic and Corolla, I'd test drive 'em (with stick), and see how they felt. But I'd be approaching this choice partial to the Civic. I would not want any sort of automatic transmission, or the turbo engine.
  • Merc190 I would say Civic Si all the way if it still revved to 8300 rpm with no turbo. But nowadays I would pick the Corolla because I think they have a more clear idea on their respective models identity and mission. I also believe Toyota has a higher standard for quality.
  • Dave Holzman I think we're mixing up a few things here. I won't swear to it, but I'd be damned surprised if they were putting fire retardant in the seats of any cars from the '50s, or even the '60s. I can't quite conjure up the new car smell of the '57 Chevy my parents bought on October 17th of that year... but I could do so--vividly--until the last five years or so. I loved that scent, and when I smelled it, I could see the snow on Hollis Street in Cambridge Mass, as one or the other parent got ready to drive me to nursery school, and I could remember staring up at the sky on Christmas Eve, 1957, wondering if I might see Santa Claus flying overhead in his sleigh. No, I don't think the fire retardant on the foam in the seats of 21st (and maybe late 20th) century cars has anything to do with new car smell. (That doesn't mean new car small lacked toxicity--it probably had some.)
  • ToolGuy Is this a website or a podcast with homework? You want me to answer the QOTD before I listen to the podcast? Last time I worked on one of our vehicles (2010 RAV4 2.5L L4) was this past week -- replaced the right front passenger window regulator (only problem turned out to be two loose screws, but went ahead and installed the new part), replaced a bulb in the dash, finally ordered new upper dash finishers (non-OEM) because I cracked one of them ~2 years ago.Looked at the mileage (157K) and scratched my head and proactively ordered plugs, coils, PCV valve, air filter and a spare oil filter, plus a new oil filter housing (for the weirdo cartridge-type filter). Those might go in tomorrow. Is this interesting to you? It ain't that interesting to me. 😉The more intriguing part to me, is I have noticed some 'blowby' (but is it) when the oil filler cap is removed which I don't think was there before. But of course I'm old and forgetful. Is it worth doing a compression test? Leakdown test? Perhaps if a guy were already replacing the plugs...