Piston Slap: An Exedy-ous From Logical Clutching?

James writes:

Hi Sajeev,

I’ve got a 2003 Impreza WRX (blob-eye) that’s covered 96,000 km now. I bought it two years ago from the original owner, who seemed to take very good care of the car (every receipt since new). The car has been almost faultless.

About 4,000 km ago, at 92,000 km, the original clutch was clearly on its last legs. Under wide open throttle in 3rd gear, the clutch would slip and struggle to get power down. So off it went to a local WRX specialist to have the clutch replaced with a new kit: new pressure plate, machined flywheel and new Exedy OEM (standard, not heavy duty) replacement clutch.

However, when I got the car back, it felt completely wrong.

Read more
Piston Slap: Start With Spark Plugs!

Done Duratec’d Out? (photo courtesy: Supaman)

TTAC Commentator Supaman writes:

Hi Sajeev,

Haven’t visited TTAC in a while but I’m back! My Mazda 6 has now crossed the 101k mileage marker and all your nuggets of wisdom have helped keep this classic functional and beautiful. However, there’s another problem rearing its head that has plagued even the Mazda forums I’ve visited for a resolution.

It involves the car’s driveability at anything below 3000 rpm. Doesn’t matter whether the engine is just warming up or at operational temperature, the car will hesitate (sometimes violently) in a stuttering/bucking fashion when accelerating from a stop through the gears until I crest that magic 3000 mark on the tach. Out on the highway, passing in top gear is almost impossible because of the engine’s hesitation if revs fall below that number, requiring a downshift to 4th to keep them up. At first I thought my manual skills were to question but then I never started experiencing this issue until around the 87,000 mile mark. It has since gotten worse. Sometimes the bucking is enough to trigger the CEL but then it always goes away after a while.

Browsing the forums I’ve tried everything from cleaning the MAF sensor, fuel injector cleaner, throttle body cleaning as well as replacing the O2 sensor. I’ve narrowed it down to either spark plugs (some forum members replaced theirs but the problem came back hours later), the coils or possibly a vacuum leak. One post I read indicated a potential cylinder misfire. Even Mazda dealers were confounded.

Read more
Piston Slap: Crystal Ballin' With Yo Tranny! (Part II)

Aaron writes:

Hey Sajeev,

Huge fan of TTAC and the piston slap articles. My problem is that I noticed my car(2007 honda civic)would shudder, under light throttle and low rpms especially when going up a slight slope. This usually happens at 30km/hr or 40km/hr. I took it to the honda dealer(4 months ago) and he said the torque converter(tc) needs to be replaced(300 for tc plus 900 for labour and stuff).

Read more
  • Dave M. IMO this was the last of the solidly built MBs. Yes, they had the environmentally friendly disintegrating wiring harness, but besides that the mechanicals are pretty solid. I just bought my "forever" car (last new daily driver that'll ease me into retirement), but a 2015-16 E Class sedan is on my bucket list for future purchase. Beautiful design....
  • Rochester After years of self-driving being in the news, I still don't understand the psychology behind it. Not only don't I want this, but I find the idea absurd.
  • Douglas This timeframe of Mercedes has the self-disintegrating engine wiring harness. Not just the W124, but all of them from the early 90's. Only way to properly fix it is to replace it, which I understand to be difficult to find a new one/do it/pay for. Maybe others have actual experience with doing so and can give better hope. On top of that, it's a NH car with "a little bit of rust", which means to about anyone else in the USA it is probably the rustiest W124 they have ever seen. This is probably a $3000 car on a good day.
  • Formula m How many Hyundai and Kia’s do not have the original engine block it left the factory with 10yrs prior?
  • 1995 SC I will say that year 29 has been a little spendy on my car (Motor Mounts, Injectors and a Supercharger Service since it had to come off for the injectors, ABS Pump and the tool to cycle the valves to bleed the system, Front Calipers, rear pinion seal, transmission service with a new pan that has a drain, a gaggle of capacitors to fix the ride control module and a replacement amplifier for the stereo. Still needs an exhaust manifold gasket. The front end got serviced in year 28. On the plus side blank cassettes are increasingly easy to find so I have a solid collection of 90 minute playlists.