GM Reaches Deal With Bankrupt Parts Supplier, But Parts Supply Still Shaky

General Motors executives are breathing a sigh of relief after the automaker reached a deal with a supplier that threatened to shut down GM’s entire U.S. assembly operation.

The automaker hammered out an agreement with the bankrupt Clark-Cutler-McDermott Company, a supplier of trim and acoustic insulation that GM had been propping up financially since March, the Wall Street Journal reports.

Read more
GM Faces 'Catastrophic' Assembly Disruption After Parts Supplier Goes Bankrupt

A Massachusetts-based parts supplier you’ve probably never heard of could force General Motors’ entire North American operation to grind to a halt.

Clark-Cutler-McDermott Co. stopped making acoustic insulation and trim pieces for GM vehicles on Friday after declaring Chapter 11 bankruptcy, a situation it blames on money-losing contracts signed with the automaker, a source told The Detroit News.

Read more
Tesla, Free of Model X Production Constipation, Hits 100,000 Unit Annual Production Rate

The stuck cork that was the Model X has finally cleared its supply hurdles, causing Tesla production to hit a new high at the automaker’s Fremont, California factory.

With assembly of that model speeded up, Tesla recently hit a production rate of 2,000 vehicle per week, a knowledgeable source told Electrek — a figure that’s still way off the company’s goal of building half a million units per year within the next 18 months or so.

Read more
Musk Cracks the Whip on Tesla Production, Experts Say 'Get Real'

Everyone and their 90-year-old great aunt knows that Tesla is putting all of its might into reaching a volume target of 500,000 vehicles in 2018, but more voices are now calling CEO Elon Musk’s timeline impossible.

Musk wants high-volume production to start in less than two years, but suppliers tell Reuters that the accelerated target is a pipe dream. Will delays in parts sourcing and other nitty-gritty issues throw cold water on Tesla’s plans (and customers’ Model 3 ownership dreams)?

Read more
Fiat-Chrysler Earnings Rise Sharply; Ram Production Coming to Sterling Heights

Fiat Chrysler Automobiles CEO Sergio Marchionne has a good morning today, after FCA announced boosted profit and earnings spurred by healthy sales in the U.S. and Europe.

First quarter net profits were up from just above the break-even point a year ago to 451 million euros ($539.4 million), according to The Detroit News, with pre-tax earnings up 88 percent to 1.3 billion euros ($1.6 billion).

Read more
Equinox Gives Oshawa Consolidated Line Extended Life

GM Canada announced Wednesday it will make a small investment in Oshawa Assembly’s Consolidated Line thanks to increased demand of the Chevrolet Equinox.

“It’s a modest investment in terms of its size, but it increases the volume of stamping we do at CAMI to increase the run. (The increased stamping) will then boost Equinox production in Oshawa,” GM Canada’s VP of Corporate and Environmental Affairs David Paterson said in an interview with TTAC.

More body panels are stamped at CAMI than that plant’s assembly line can use, which required GM to utilize its “shuttle program” to transport excess Equinox bodies to Oshawa’s Consolidated Line for final assembly, according to GM.

The majority of the $12 million CAD investment will go to CAMI, though the detailed amount was not disclosed. Additional labor will not be needed to produce the additional Equinoxes.

While the success of an 11-year-old model (the Equinox went into its second generation as an enhanced refresh) is newsworthy, there is a larger issue at play.

“That investment has the effect of extending further the Consolidated Line until at least 2017,” said Paterson.

Read more
BREAKING: Worker Crushed To Death At Grand Cherokee, Durango Plant

UPDATE: Previous incident at Jefferson North included at bottom.

UPDATE 2: Added name of worker and clarified details.

A worker was crushed and ultimately succumbed to his injuries this morning at Chrysler’s Jeep Grand Cherokee and Dodge Durango plant.

Read more
General Motors Will Build Next-Gen Chevrolet Cruze In Mexico

General Motors is re-jigging its assembly footprint for the Chevrolet Cruze, adding assembly at a Mexican facility as other plants, like Australia, wave goodbye to GM’s global small car.

Read more
Toyota Next To Join Mexican Assembly Fiesta

Although Toyota has previously looked to maximize capacity at its existing North American plants, a report by Bloomberg suggests that the company will depart from this policy and look to establish a manufacturing facility in Mexico, following the lead of Honda, Mazda and Nissan in the Japanese auto industry’s drive to localize production.

Read more
Volkswagen Crossover Will Be Built In Chattanooga

Reuters is reporting that the long-awaited decision on the production site of Volkswagen’s new crossover is set to be handed down any day now, and the winner is Chattanooga.

Read more
Ontario Government Selling GM Shares To Fund Public Transit

The government of Ontario has announced it will sell its shares in General Motors as part of an effort to fund new public transit programs in the Greater Toronto Area. But the move could end up hastening the demise of GM’s Oshawa plant, located in the same metropolitan area.

Read more
Toyota Plants In Canada On The Path To Organizing

The UAW’s troubles with organizing Volkswagen’s Chattanooga plants are well known throughout the auto world, but Unifor, the Canada union that was once known as the Canadian Auto Workers union, now claims that it has enough union cards to hold a vote on representation.

Read more
GM, Unions Reach Tentative Agreement On CAMI Plant

GM and Unifor (the union formerly known as the CAW) have reached a tentative agreement for the 2,500 workers at the CAMI plant in Ingersoll, Ontario, which builds the Chevrolet Equinox and GMC Terrain.

Read more
GM Lands A One-Two Punch As Mokka Moves To Spain

Amid labor unrest in Korea, and a desire to utilize capacity in Europe, G M is moving production of the Opel Mokka (aka, the Buick Encore, and Canada’s Chevrolet Trax) out of Korea and into a facility in Zaragoza, Spain.

Read more
Transplants Could Account For Half Of American Auto Production In Five Years

In less than a decade, the number of auto company workers employed by companies other than the Big 3 has risen from 25 to 39 percent. But by 2017 that number could rise to 50 percent.

Read more
  • Bkojote Allright, actual person who knows trucks here, the article gets it a bit wrong.First off, the Maverick is not at all comparable to a Tacoma just because they're both Hybrids. Or lemme be blunt, the butch-est non-hybrid Maverick Tremor is suitable for 2/10 difficulty trails, a Trailhunter is for about 5/10 or maybe 6/10, just about the upper end of any stock vehicle you're buying from the factory. Aside from a Sasquatch Bronco or Rubicon Jeep Wrangler you're looking at something you're towing back if you want more capability (or perhaps something you /wish/ you were towing back.)Now, where the real world difference should play out is on the trail, where a lot of low speed crawling usually saps efficiency, especially when loaded to the gills. Real world MPG from a 4Runner is about 12-13mpg, So if this loaded-with-overlander-catalog Trailhunter is still pulling in the 20's - or even 18-19, that's a massive improvement.
  • Lou_BC "That’s expensive for a midsize pickup" All of the "offroad" midsize trucks fall in that 65k USD range. The ZR2 is probably the cheapest ( without Bison option).
  • Lou_BC There are a few in my town. They come out on sunny days. I'd rather spend $29k on a square body Chevy
  • Lou_BC I had a 2010 Ford F150 and 2010 Toyota Sienna. The F150 went through 3 sets of brakes and Sienna 2 sets. Similar mileage and 10 year span.4 sets tires on F150. Truck needed a set of rear shocks and front axle seals. The solenoid in the T-case was replaced under warranty. I replaced a "blend door motor" on heater. Sienna needed a water pump and heater blower both on warranty. One TSB then recall on spare tire cable. Has a limp mode due to an engine sensor failure. At 11 years old I had to replace clutch pack in rear diff F150. My ZR2 diesel at 55,000 km. Needs new tires. Duratrac's worn and chewed up. Needed front end alignment (1st time ever on any truck I've owned).Rear brakes worn out. Left pads were to metal. Chevy rear brakes don't like offroad. Weird "inside out" dents in a few spots rear fenders. Typically GM can't really build an offroad truck issue. They won't warranty. Has fender-well liners. Tore off one rear shock protector. Was cheaper to order from GM warehouse through parts supplier than through Chevy dealer. Lots of squeaks and rattles. Infotainment has crashed a few times. Seat heater modual was on recall. One of those post sale retrofit.Local dealer is horrific. If my son can't service or repair it, I'll drive 120 km to the next town. 1st and last Chevy. Love the drivetrain and suspension. Fit and finish mediocre. Dealer sucks.
  • MaintenanceCosts You expect everything on Amazon and eBay to be fake, but it's a shame to see fake stuff on Summit Racing. Glad they pulled it.