QOTD: Feeling Deflated?

I blame Chris Tonn for a minor annoyance that befell me the other day. Maybe it was his fault, maybe it was fate. Maybe I jinxed myself.

For reasons immediately lost to the ether, the two of us found ourselves embroiled in a discussion on spare tires. Unlucky when it comes to flats, Chris bemoaned his puncture-filled past as I gloated that, despite years of driving in remote locales, my last flat tire was probably a half-decade ago. Someone or something was listening. Sure enough, just two days later, a rusty nail sliced through my front passenger-side Continental.

He won’t pick up the tab, the jerk. I don’t think I’m being unreasonable here.

Read more
Piston Slap: Spare Me Your AWD Drama

TTAC Reader DeSoto writes:

Greetings, Sajeev — longtime reader, first time writer, and I enjoy the content your column adds to TTAC! (Woot! — SM)

I recently acquired an all-wheel drive 2014 Cadillac CTS with about 15,000 miles on its factory 255/35 R19 Pirelli P7 run-flat tires. Looking ahead to an upcoming 3,500 mile driving trip, I have concern for the durability/drivability of the run-flats. The CTS is not equipped with any wheel-changing tools (jack, wrench, spare tire/wheel). A spare tire assembly (for the CT6) is available online, but I believe the standard compact spare is too small in diameter to be compatible with the 19-inch wheels on the AWD drivetrain. I prefer the freedom of having the option of changing a tire myself and continuing on my way, rather than waiting hours for assistance. I am thus considering, in order of my current preference:

Read more
Piston Slap: The Little Hole, The Truck Spare Tire

TTAC commentator Macca writes:

Sajeev,

This is random, but I was wondering if you could look into an automotive curiosity that has bugged me for some time. Internet searches on the subject have not produced any answers so far, unfortunately.

I do not own a Ram truck, nor do I envision ever purchasing one, but I do often find myself sitting in traffic behind one. I’ve noticed that on recent models, the rear bumper has a slight indentation above and to the right of the license plate area. This indentation appears to coincide with what appears to be a drain hole of some sort for the bed, but the two aren’t ever fully aligned.

Read more
Piston Slap: "Spare" Me From Dry Rot!

TTAC Commentator sastexan writes:

With the extreme cold throughout the US and seeing a few shredded tires on the highway this week (in fact, I had a flat myself – not sure what caused it but possibly doing donuts in the FR-S on a parking lot last week with lots of broken up ice on the edges), I got to thinking about spare tires.

Read more
Have A Toyota Sienna? Do You Know Where Your Spare Tire Is?

And the hits, they keep on coming: The Nikkei [sub] has it that Toyota will recall 740,000 Sienna minivans that have been sold or operated in cold-weather areas in the United States and Canada. They’ll be checking for corrosion of the spare tire carrier cable.

Read more
  • Lorenzo Yes, they can recover from the Ghosn-led corporate types who cheapened vehicles in the worst ways, including quality control. In the early to mid-1990s Nissan had efficient engines, and reliable drivetrains in well-assembled, fairly durable vehicles. They can do it again, but the Japanese government will have to help Nissan extricate itself from the "Alliance". It's too bad Japan didn't have a George Washington to warn about entangling alliances!
  • Slavuta Nissan + profitability = cheap crap
  • ToolGuy Why would they change the grille?
  • Oberkanone Nissan proved it can skillfully put new frosting on an old cake with Frontier and Z. Yet, Nissan dealers are so broken they are not good at selling the Frontier. Z production is so minimal I've yet to see one. Could Nissan boost sales? Sure. I've heard Nissan plans to regain share at the low end of the market. Kicks, Versa and lower priced trims of their mainstream SUV's. I just don't see dealerships being motivated to support this effort. Nissan is just about as exciting and compelling as a CVT.
  • ToolGuy Anyone who knows, is this the (preliminary) work of the Ford Skunk Works?