#ChevroletImpala
General Motors Adding Shifts At Ontario Plants
Good news for Canada’s manufacturing sector; GM has confirmed plans to add a third shift to the Oshawa Flex Line to help meet demand for the 2014 Chevrolet Impala.
RIP To The Front Bench Seat
The days of the six passenger sedan are officially over; with the death of the current generation Chevrolet Impala, the front bench seat is now gone from the North American marketplace.
Closing Oshawa Could Violate GM's Bailout Conditions
As part of their bailout package, General Motors agreed that at least 16 percent of its North American production would take place in Canada. The closing of the Oshawa consolidated line may cause GM to be in violation of those terms.
Is There A Silver Lining Amid The GM Oshawa Closure?
GM has just gotten back to us about the Oshawa Consolidated plant closing down next year, and despite the carefully worded, PR-approved statements, there are some good nuggets of information, and perhaps a couple conclusions to draw from here.
GM Closing Oshawa Consolidated Line, Equinox And Impala Production Moving To United States
General Motors will announce tomorrow that their consolidated line at Oshawa, currently building both the Chevrolet Equinox and Chevrolet Impala, will close. 2,000 of the 4,000 jobs at the Oshawa plant are located at the consolidated factory, and GM apparently won’t be re-investing in the facility.
Junkyard Find: 1969 Chevrolet Impala
GM made immense quantities of full-sized Chevrolets in 1969. How many? According to the Standard Catalog, the total production of ’69 Biscaynes, Bel Airs, Impalas, and Caprices was 1,168,300 cars. Well into the early 1980s, these things were as commonplace on American streets as mid-2000s Camrys are today. Given that nobody with the money to restore a ’69 big Chevy is going to waste time on a non-hardtop four-door (what with the large quantities of restorable coupes and convertibles still extant) we can assume that the few remaining sedans will be flushed out by $250/ton scrap-steel prices and crushed during the next few years.
We Apologize In Advance For This Video You Are About To See, Both To You And To General Motors
The outrageous indifference, mixed with distate enthusiasm shown by TTACers for our Chicago Auto Show Video led us to think that it would be a good idea to do one for the New York Auto Show. Unfortunately, Vodka McBigbra’s dental emergency forced me to bounce out of the show halfway through. The video crew was left with an absolute mishmash of first-take cynicism and random Asians wandering through the shots.
New York 2012: Chevrolet Impala Back In Black
The ancient Chevrolet Impala will finally get a replacement, in the form of the 2014 Impala shown above. The newest GM full-size will get a V6 engine, setting it apart from the 2013 Malibu. An eAssist 4-cylinder will be the base engine.
A Snapshot Of January Sales: Honda Civic Is America's Third Best-Selling Car
One month is far too premature to make any predictions about 2012’s sales race, but we still got our hands on the data, thanks to independent analyst Timothy Cain. As usual, the Ford F-Series and Toyota Camry were the top dogs.
1965 Impala Hell Project, Part 20: The End
More than a month has passed since Part 19 of the Impala Hell Project series, partly because I’ve been getting sliced up by sadistic doctors and flying on Elvis-grade prescription goofballs but mostly because the final chapter has been so difficult to write. Here goes!
1965 Impala Hell Project, Part 18: Back To the Dragstrip, Website 1999
Summer, 1999: I’d managed to get the Impala into the 14s, barely, with a screamin’ 406-cubic-inch small-block under the hood, but I knew the car would do much better with more traction. Meanwhile, my desire to tell the car’s story coincided with a job move into the maelstrom of dot-com madness.
1965 Impala Hell Project, Part 16: Another Heart Transplant
After painstakingly building a medium-hot 406-cubic-inch small-block engine to replace the Impala’s very tired 350 (motivated by the car’s lackluster quarter-mile performance), 1998 became 1999. Finally the New Engine was ready for swapping.
1965 Impala Hell Project, Part 15: No Replacement For Displacement!
Before packing up the Impala and leaving Georgia in the fall of 1996, I took the car to Atlanta Dragway and ran some semi-disappointing low-17-second quarter-mile passes. Back in California, I resolved to make some improvements to the car’s running gear. After 15 years as a cheapskate, junkyard-centric gearhead, I was finally willing to spend substantial cash for new aftermarket performance parts. The main question was: what kind of engine would I build?
1965 Impala Hell Project, Part 14: First Taste of the Quarter-Mile
After I moved from San Francisco to Atlanta and then got a job writing Year One’s catalogs, rubbing elbows with all those drag-race-crazed Southern gearheads on the job meant that it wasn’t long before I took the Impala to the dragstrip.
1965 Impala Hell Project, Part 13: Mad Max At the Confederate Mount Rushmore
After I hauled all my stuff 2,500 miles in the Impala and settled in Georgia, it was time for me to go job-hunting. After a few boring office-temp jobs, I spotted an ad that got my attention: Copywriter needed to write catalogs for large auto-parts company. Must know classic American cars. Within minutes of showing up for my interview at Year One, I had my first full-time writing job… and a nickname inspired by my car: Mad Max.
Recent Comments