Not every hero gets a statue, and not every brilliant accomplishment gets a plaque. There are more things in heaven and earth than are dreamt of in your philosophy, and many a spectacular occurrence is forgotten the moment after it happens.
This is the story of a sheetmetal worker who built a car to nearly unimaginable standards of precision and perfection … then decided to walk away from it for reasons that only he can understand.
General Motors announced Tuesday that the automaker would recall 1.3 million cars for an oil leak that could ignite, Reuters reported.
According to the report, 1,345 fires have been reported in cars that were repaired for similar issues under two previous recalls. In six years, 19 minor injuries were reportedly caused by leaking oil.
I have changed the seal 2 times on my 3.8L Chevy and it still will leak. I had a place on harmonic balancer.I put the recommended slave to repair.It was not long enough to cover the bad spot on the balancer.It was close but they seal was damaged.They offer a different one that is $30+.This all occurred just out of the blue.I rebuilt the engine and it has 30,000 on it.I was wondering if there is something causing pressure around this seal.Pressure check on cylinders was good.Any ideas what to do or pressure is good too good.
Thank you sincerely – Robert
Latest Car ReviewsRead more
Latest Product ReviewsRead more
- Tassos VW's EV program losses have already been horrific, and with (guess, Caveman!) the Berlin-Brandenburg Gigafactory growing with leaps and bounds, the future was already quite grim for VW and the VW Group.THis shutdown will not be so temporary.The German Government may have to reach in its deep pockets, no matter how much it hates to spend $, and bail it out."too big to fail"?
- Billccm I had a 1980 TC3 Horizon and that car was as reliable as the sun. Underappreciated for sure.
- Inside Looking Out I did not notice, did they mention climate change? How they are going to fight climate change, racism and gender discrimination. I mean collective Big 3.
- Lou_BC I'm not too picky about gloves. If I'm concerned about heavy oil or grease contamination, I'll donn nitrile gloves. Heavier work and I'll use "old school" leather gloves, fake leather, synthetic or whatever is available.
- Dusterdude Getting the popcorn ready . May be a good plan for strikers to make sure they own good winter jackets for future pickets .