Paul Elio Wishes Folks Would Look On the Bright Side

Ronnie Schreiber
by Ronnie Schreiber

As TTAC reported recently, Elio Motors disclosed in its most recent annual report to the Securities and Exchange Commission it needs an additional $64 million to begin series production of its first vehicle at a former General Motors assembly plant in Shreveport, Louisiana. This is on top of the $312 million it previously stated it required to bring the high-mileage trike to reality.

That isn’t the worst news.

In the filing, Elio Motors announced it was laying off sales and engineering personnel to conserve resources as it focused on securing more financing, primarily through the sale of stock and taking on more debt. An unnamed vendor is also in a payment dispute with Elio Motors, and the company is running a $100+ million deficit.

“Sure, there’s bad news,” Elio said on a phone call with TTAC, “but there’s also good news in the annual report that people are ignoring.”

Elio Motors’ success is looking increasingly bleak. However, there is a pattern. Each time Elio makes some kind of financial report or the topic heats up locally, journalists take note, write about the problems, and Elio’s stock price drops.

The latest financial news comes on the heals of local politicians in Shreveport complaining Elio has tied up a facility that could’ve been leased to going concerns.

By now, Elio’s publicly traded stock has dropped from a steady $20/share to below $7, making it even harder to find financing.

$100 million in the hole

“All startups have a deficit. Have you looked at Tesla’s deficit lately?” Elio answered.

Tesla has a large deficit on the books and isn’t yet profitable. The bonds it recently sold as part of the $1.15 billion it raised through equity and debt (the same way Elio hopes to raise a smaller amount of cash) have been described by Forbes as “junk”.

However, unlike Elio Motors, Tesla has built and delivered tens of thousands of cars, Paul Elio pointed out, whereas his own firm hasn’t yet even finished the 25 final engineering prototypes it must complete, let alone a single production vehicle.

Unpaid vendor and committed suppliers

Elio wouldn’t identify the unpaid vendor, but he said the amount in dispute was “relatively minor” compared to the financial commitments to the project made by some very large vendors in terms of engineering and equipment costs.

For example, Aisin, which will be supplying the Elio trike’s five-speed manual and automated-manual transmissions, committed $36.6 million to the project. Linamar will be in charge of engine assembly at the Shreveport plant and has said it will provide $45 to $50 million in general manufacturing equipment to support production. And Hyundai DYMOS will supply seats from a satellite assembly line in the Shreveport plant. That supplier has committed $1.8 million for needed equipment and renovations.

Primary investor doubles down

Elio pointed to another section of the annual report that stated Stu Lichter — the company’s primary backer, real estate broker, and holder of the lease on the Shreveport factory — “advanced” Elio Motors over $6,250,000 since the start of 2016.

Additionally, Lichter recently purchased $200,000 worth of Elio Motors common stock at $5.98 a share.

None of that reduces the $376 million Elio Motors needs to raise if it has any chance of starting production by the end of 2017, a date pushed back so many times that many of Elio’s 64,000 or so reservation holders simply don’t believe it anymore — or any of Paul Elio’s other promises.

Marked for death?

It may be time for an Elio Motors Death Watch, but it won’t be because Paul Elio is a scam artist.

Instead, Paul and his associates, for all their previous experience in the auto industry, may have simply failed to accurately estimate how long it was going to take to develop their vehicle, and how much money it was going to take to get it to series production.

One could understand it if Paul Elio threw in the towel, but he’s not giving up on his three-wheeled dream just yet.

Ronnie Schreiber
Ronnie Schreiber

Ronnie Schreiber edits Cars In Depth, the original 3D car site.

More by Ronnie Schreiber

Comments
Join the conversation
2 of 32 comments
  • Voyager Voyager on May 10, 2017

    Let's face it. If Musk had his mind set on bringing three-wheelers, the whole venture would have been further. In many respects, what Musk did, is much more difficult.

  • Wumpus Wumpus on May 13, 2017

    Has he considered exporting to Germany? There's some sort of set of regulations that make it worth converting Golfs into three-wheelers. Might work if you need margins. $100M in the hole, before tooling up? I suspect you were paying consultants as fast as you could.

  • Redapple2 I think I ve been in 100 plants. ~ 20 in Mexico. ~10 Europe. Balance usa. About 1/2 nonunion. I supervised UAW skilled trades guys at GM Powertrain for 6 years. I know the answer.PS- you do know GM products - sales weighted - average about 40% USA-Canada Content.
  • Jrhurren Unions and ownership need to work towards the common good together. Shawn Fain is a clown who would love to drive the companies out of business (or offshored) just to claim victory.
  • Redapple2 Tadge will be replaced with a girl. Even thought -today- only 13% of engineer -newly granted BS are female. So, a Tadge level job takes ~~ 25 yrs of experience, I d look at % in 2000. I d bet it was lower. Not higher. 10%. (You cannot believe what % of top jobs at gm are women. @ 10%. Jeez.)
  • Redapple2 .....styling has moved into [s]exotic car territory[/s] tortured over done origami land.  There; I fixed it. C 7 is best looking.
  • TheEndlessEnigma Of course they should unionize. US based automotive production component production and auto assembly plants with unionized memberships produce the highest quality products in the automotive sector. Just look at the high quality products produced by GM, Ford and Chrysler!
Next