Feds Pass Low Volume Law, Turn-key Fun for Everyone

by Chris Tonn

Published: December 9th, 2015

feds pass low volume law turn key fun for everyone

For decades, enthusiasts came to dread new motor vehicle laws, as they typically conspire against the use of motor vehicles for fun. Post-Nader safety regulations that made cars heavier and less nimble came first. Emissions laws came a few years later, which strangled the previously-unrestricted engines into submission. The death of leaded fuel helped many of those old dinosaurs meet their untimely end.

For once, however, a massive new bill has actually lifted some restrictions. The Low Volume Motor Vehicle Manufacturers Act of 2015 ( as we covered in June) was passed last week as part of the Surface Transportation Reauthorization and Reform Act of 2015.

Basically, the law allows small-volume replica car builders to offer turn-key cars (rather than kits in roller form) without meeting the most stringent of safety laws. However, there won’t be any coal-rollin’ from the factory as those turn-key cars will still need to be built with EPA-compliant engines.

What this means for us: There could easily be new DeLoreans running about soon. This opens up ICON to build more Broncos, which will please TTAC’s editor greatly. MGB, Mini, and Sprite body shells have been available for years from British Motor Heritage. Perhaps someone Stateside could begin offering something like the luscious Frontline MG LE 50. Of course, there will be even more Cobras.

What obscure relic would the B&B like to see revived? For me, I’d like nothing more than to buy a brand new Citroen DS with a modern powerplant. What say ye?

[Photos: Factory Five Racing, ICON 4×4, Auctionata, Frontline Developments]

#BritishMotorHeritage #Bronco #Cobra #Delorean #FactoryFiveRacing #ICON4x4 #LowVolumeMotorVehicleManufacturersActOf2015 #MG #MGB #MGBGT #SurfaceTransportationReauthorizationAndReformActOf

Chris Tonn

Some enthusiasts say they were born with gasoline in their veins. Chris Tonn, on the other hand, had rust flakes in his eyes nearly since birth. Living in salty Ohio and being hopelessly addicted to vintage British and Japanese steel will do that to you. His work has appeared in eBay Motors, Hagerty, The Truth About Cars, Reader's Digest, AutoGuide, Family Handyman, and Jalopnik. He is a member of the Midwest Automotive Media Association, and he's currently looking for the safety glasses he just set down somewhere.

More by Chris Tonn

Comments

Join the conversation

3 of 77 comments

Wristtwist on Dec 11, 2015

Oh boy.... An earlier Taco with the re22 in it (or a modern 4, just want a small, light truck) E28 with a modern inline 6 (strip out the tech, i just want reliable transportation) E38 with just better reliability and less running costs `65 Connie with better everything except style (mostly NVH concerns) 22b STI Alfa Romeo GTV-6 with a larger driver position (I just dont fit, sadly. I gave away my resto project because of that) Alfa Romeo Spider - I cant decide if I want a new 66 or 67 long tail, or a 91 with that sweet 1.75 turbo. hmmmmm 1989 Civic SI hatchback with a new K series in it, with better NVH. FD3S with something. I dont even care if it's a rotary, just bring that body back!! A New Hope! First gen (if they ever launch the second gen) NSX. Bring that body back Revenge of the Reliable! `04-06 V70R with GM's Magnaride, someone else's electonics and maybe a coyote 5.0 Return of the Moose!

Like Reply
- Wristtwist on Dec 12, 2015
  
  Forgot one! Mercedes-Benz W100 600 Pullman. The 4 door variant, not the 6 door. A fantastically handsome car for the bond villain in your life.
  
  Like
05lgt on Dec 11, 2015

Can't quit this game. Dino Eco-boost 240Z with modern BMW MPower BMW 2002 with same. E type with GT350 flat crank. Yes. Thats the one. Might have to go with a dry sump and a larger cowl, but those looks, that sound, so much shove....

Like Reply

Recent Comments

Duke Woolworth Weight 4800# as I recall.
Kwik_Shift_Pro4X '19 Nissan Frontier @78000 miles has been oil changes ( eng/ diffs/ tranny/ transfer). Still on original brakes and second set of tires.
ChristianWimmer I have a 2018 Mercedes A250 with almost 80,000 km on the clock and a vintage ‘89 Mercedes 500SL R129 with almost 300,000 km.The A250 has had zero issues but the yearly servicing costs are typically expensive from this brand - as expected. Basic yearly service costs around 400 Euros whereas a more comprehensive servicing with new brake pads, spark plugs plus TÜV etc. is in the 1000+ Euro region.The 500SL servicing costs were expensive when it was serviced at a Benz dealer, but they won’t touch this classic anymore. I have it serviced by a mechanic from another Benz dealership who also owns an R129 300SL-24 and he’ll do basic maintenance on it for a mere 150 Euros. I only drive the 500SL about 2000 km a year so running costs are low although the fuel costs are insane here. The 500SL has had two previous owners with full service history. It’s been a reliable car according to the records. The roof folding mechanism needs so adjusting and oiling from time to time but that’s normal.
Theflyersfan I wonder how many people recalled these after watching EuroCrash. There's someone one street over that has a similar yellow one of these, and you can tell he loves that car. It was just a tough sell - too expensive, way too heavy, zero passenger space, limited cargo bed, but for a chunk of the population, looked awesome. This was always meant to be a one and done car. Hopefully some are still running 20 years from now so we have a "remember when?" moment with them.
Lorenzo A friend bought one of these new. Six months later he traded it in for a Chrysler PT Cruiser. He already had a 1998 Corvette, so I thought he just wanted more passenger space. It turned out someone broke into the SSR and stole $1500 of tools, without even breaking the lock. He figured nobody breaks into a PT Cruiser, but he had a custom trunk lock installed.