Alpha: General Motors Last Hope For The Commodore

Derek Kreindler
by Derek Kreindler

I believe 2013 will be a year that Australia decides whether it wants to have an auto industry or not,

-Mike Devereux, Holden’s former Managing Director, in November, 2012

Those ominous words spoken by Mike Devereux last year have taken on an almost eerie significance in light of yesterday’s events. After more than a half century of building cars in Australia, Holden will now become a “national sales company”, ostensibly selling rebadged global General Motors products, manufactured in places like Korea and Thailand.

But veiled remarks about the Australian auto industry aren’t the only words uttered by Devereux that caused us to take notice. At the launch of the latest VF Commodore, Devereux made a vague statement about the Commodore’s future, implying that it would be built on a global platform at the Adelaide factory. While the latter is no longer possible, there’s still hope that the Commodore could live a GM architecture. The only question is, which one?

Originally, Devereux claimed that two global architectures were coming to Adelaide after 2016 – and one of them would be the next Commodore.

“This [Commodore] will run through to the end of 2016. After that time we are going to be putting two global architectures into the [Adelaide] plant, one of them will underpin the next Commodore.”

To make sure he wasn’t misunderstood, Devereux repeated: “There is another Commodore coming after this one. We’re going to build it in Adelaide on a [global] architecture.”

While production at Adelaide is off the table, there is still the matter of which architecture could be used, with two schools of thought on the matter.

The predominant theory is (or was – until Holden decided to close up shop) that the Commodore would move to the front-drive Epsilon II architecture, and become little more than a rebadged Chevrolet Impala or Buick Regal (media reports suggested that the next Commodore would be a front-drive car the size of a Toyota Camry and sold as a Buick in other markets).

There are plenty of good reasons to do this. Despite the broad fanfare the rear-drive Aussie sedans attract among North American enthusiasts, they are similar to other enthusiast pet interests, in that their sales and profitability does not measure up to the mythology surrounding them. Australian car buyer tastes have shifted away from cars like the Falcon and Commodore to smaller, more fuel-efficient cars – attributes better suited to front wheel drive platforms than rear drive layouts.

Smaller cars like the Toyota Corolla, Mazda3 and Hyundai i30 are dominating the sales charts currently, along with pickups like the Toyota HiLux. Hanging on to fifth place is the Holden Commodore, which is enjoying its strongest sales in some time. But even then, front drive rivals like the Toyota Camry aren’t far behind (the Camry currently sits in 9th place). The market for sedans is still there, but which wheels are driven may not matter as much.

However, the Commodore brand is not just another nameplate. Is is arguably Australia’s national car, and a front-wheel drive Commodore would be a dramatic departure from the familiar formula that Australians are used to. General Motors experiment with a Holden badged Malibu (based on Epsilon II) hasn’t been terribly well received either.

That leaves another global platform in GM’s selection, one that drives the proper wheels and crucially, has the potential for scale. The Alpha platform, currently used only on the Cadillac ATS and CTS, and eventually, the next generation Camaro, could make for a very nice next-generation Commodore. Its use as a CTS shows that it can be adapted to the size that Aussie full-size buyers (or what’s left of them) expect in a Commodore. The platform can accommodate everything from GM’s 2.0T 4-cylinder, to the 3.6L V6 in both turbo and naturally aspirated forms and crucially (for marketing, purposes at least) whatever V8 the next-generation Camaro opts for.

The three nameplates using Alpha right now won’t allow for significant volumes, given that they are luxury and nice sports car vehicles. But a new Commodore – sold as a Holden in Australia, a Buick in China and the United States and perhaps even as another sporty Chevrolet as a successor to the SS – could help Alpha get the volume it needs, while leaving Commodore diehards happy. Of course, it wouldn’t be built in Australia. Only GM’s Lansing, Michigan plant and a factory in Shanghai build Alpha. A Made In China Commodore, no matter how good, is probably the opposite of what Holden wants to deal with from a marketing perspective.

I’m not going to pretend that this is anything other than a bit of wishful thinking sprinkled with a basic understanding of auto industry economics. Nevertheless, I find it hard to believe that GM would go to the trouble of engineering an all-new rear-drive architecture and restrict it to three nameplates that will do 99 percent of their volume in North America. There has to be further use for Alpha, and I hope that the next Commodore is one of them.

Derek Kreindler
Derek Kreindler

More by Derek Kreindler

Comments
Join the conversation
2 of 26 comments
  • Buickman Buickman on Dec 12, 2013

    How to Save Holden: maybe they need to go to alpha numeric nameplates, close a bunch of dealers and force the rest to spends millions on unnecessary facility upgrades. then develop the world's most intricate and confusing incentive structure while hiring overpaid and useless spokesmen to populate idiotic and meaningless advertisements featuring distress pricing and clowns. oh wait, that segment is already taken by GMNA. Buickman Founder GeneralWatch.com

  • Namstrap Namstrap on Dec 12, 2013

    Oh, I'm so with you on that one, Buickman!

  • IBx1 Everyone in the working class (if you’re not in the obscenely wealthy capital class and you perform work for money you’re working class) should unionize.
  • Jrhurren Legend
  • Ltcmgm78 Imagine the feeling of fulfillment he must have when he looks upon all the improvements to the Corvette over time!
  • ToolGuy "The car is the eye in my head and I have never spared money on it, no less, it is not new and is over 30 years old."• Translation please?(Theories: written by AI; written by an engineer lol)
  • Ltcmgm78 It depends on whether or not the union is a help or a hindrance to the manufacturer and workers. A union isn't needed if the manufacturer takes care of its workers.
Next