Piston Slap: One of "Those People…"

Sajeev Mehta
by Sajeev Mehta
TTAC Commentator MNM4EVER writes:

A mechanic friend of mine has a 1993 LX 5.0 w/AOD in slightly rough condition he is looking to get rid of. I can pick it up now, complete but not running, for $1800. If I do not buy it, he plans to get it running but otherwise not fix it up and sell it for $3k or so.

My goal for my potential Mustang is to resto-mod it… 4.6L Cobra motor, track suspension, Cobra disc brakes all around, restore the interior but replace the seats, maybe even swap in a later 94-2004 dash, etc. Since I am looking to replace much of the major components of the car, a rough project car is a definite option for me.

But this rough car needs a lot of other things replaced too… all of the exterior moldings are weathered and degrading thanks to sitting in the Florida sun, the interior is trashed all around, paint is very bad, the body has dings and cracked plastic bumpers, surface rust has set in on many places and a little rust appears on the hatch edges, etc. I am guessing I would need to strip it completely and spend around $2k on bodywork to get it fixed, but then it would be showroom new. But the idea of replacing all those moldings and interior parts scares me… sh!t adds up fast.

So my long drawn out question: Is this a good buy at $1800? Or should I keep looking for a closer to mint Mustang for $5-7k that only needs minor restoration and mechanical upgrades as I see fit?

Sajeev answers:

So basically NOTHING on this Fox Mustang is up to your standards. Honestly, it’s a horrible example of Fox-aliciousness for anyone at $1800. Even if it had a T-5 (stick), this is a $1000 Fox as it sits…on a good day. $1800 if it was complete and fully assembled? Somewhat likely.

You are one of “those people” that demands a nice car and will pay big money to make it right. For you people (what do you mean YOU people?) there’s no substitute for buying the cleanest, most pristine example you can afford. $5000 or more for a clean Fox Mustang isn’t unreasonable, and that’s right for you.

Once more: buy the cleanest, most pristine example you can afford.

And when you do, you better not put the later model dash in there…that’s just wrong for the rest of the body and a complete waste of a nice car.

MNM4EVER writes:

Well, since I consider you the expert on Fox bodies (too bad 5.0 Mustangs are lamesauce and Fox Lincolns/Cougars/Granadas/etc. rule – SM) , I figured there was no one better to help with my decision. I have been considering picking up a 90-93 Mustang hatch, preferably an LX 5.0 with a stick. I don’t want a convertible, I don’t like the GT look, and I don’t want a notchback. I remember back in the day the notch was considered super rare and therefore more desirable, but today it seems like they are everywhere. I know they are lighter, I don’t care, I like the hatchback look.

This will be a long term project/driver, and will definitely get upgraded suspension and brakes, wheels, seats, and I want 300-350hp. The dilemma is that nice LX 5.0 hatches are hard to find, especially in the condition I want it. I want a nice clean interior, I don’t want a beat on drag car or a rusted banged up body, in the end I want this car to be better than new and bodywork is very expensive. I can do most mechanical and all interior work myself, but I can’t paint or fix rust and dents. Down here in Florida it seems to be easier to find mint condition 4-cyl Mustangs, many owned by elderly people with low miles, and definitely never beat on. And since they are not V8s, they are CHEAP, much less than the V8s I see for sale.

So how hard is it to do an engine and trans swap into a 4-cyl Fox body and build it up the way I want it, compared to starting with a 5.0 platform? I don’t know how many differences there are in the chassis between them. I know even 5.0 cars need chassis bracing, I am going to change out the suspension and brakes anyway, etc. And no, I don’t want to turbo the 4-cyl, I want a V8 this time. To compare, I found a pretty nice all original LX 5.0 hatch with an auto and 68k miles for $7k, but I also found a just as nice, newer 4cyl LX hatch with 48k miles for $3k.

Any advice would be appreciated!

Sajeev concludes:

When it comes to Fox bodies, always remember the first rule of modification: chassis bracing uber alles. That means subframe connectors (get the ones that bolt to the seat bottoms, weld to the subframes) a G-load brace for the front subframe and a 3-point strut tower brace. Not much extra weight, and it changes the car for the better. You will notice the difference behind the wheel in a matter of FEET, not miles.

If you only want less than 400hp (at the wheels), stick with the stock small block Ford (SBF) and upgrade the heads/cam/intake to make that up. For a street car, I’d recommend a power adder ( Whipplecharger) and the appropriate camshaft to make it sing. And apparently Mr. John Kasse is finally making a set of heads that will put the 5.0 V8 a little closer to your garden variety LSX motor.** If you buy your parts wisely, the SBF will be a good fit for your needs and not be a huge money pit. If you plan on paying someone for the motor work, save yourself the expense of a non-SBF motor swap and build a good SBF that will drop right in with zero drama.

Now about the 4-cyl to 5.0 swap: it’s a huge pain in the butt because the wiring harness must be changed (alternator, interior stuff, etc.). Not fun. But if you have the two Mustangs side-by-side and a long weekend ahead of you, you can do it. And be miserable…in the short term.

Good luck in your hunt. But take heed to my parting shot, son:

Send your queries to sajeev@thetruthaboutcars.com. Spare no details and ask for a speedy resolution if you’re in a hurry…but be realistic, and use your make/model specific forums instead of TTAC for more timely advice.

**Obviously the all-aluminum LSX-FTW swap is the ideal answer, but sometimes its cheaper (parts and labor) to accomplish almost the same thing with the factory correct engine block. I am always torn between a 5.0 or an LS in a Fox Body, in cases where less than 400 horses is needed on a reasonable budget. The stock SBF is still a good motor in certain applications, and I am pretty sure this is one of those cases. This ain’t no wheezy four-banger or a gutless V6. And the SBF sounds better than any LSX, so there’s that.

Sajeev Mehta
Sajeev Mehta

More by Sajeev Mehta

Comments
Join the conversation
2 of 58 comments
  • Mnm4ever Mnm4ever on Apr 17, 2013

    Thanks everyone for the advice. I am definitely passing on the white Mustang, I will keep my eye out for a good one. I want a project but I need to spend wisely. I love LS swaps, but I can't put an LS in a Ford, if I do a swap on a Mustang it will be with a Ford engine. If I did an LS swap I would get a GM car instead... Camaro, Monte Carlo SS, GTO. But I like how the Ford engines sound.

  • W Christian Mental Ward W Christian Mental Ward on Apr 18, 2013

    "SBF sounds better than any LSX, so there’s that" As a classic Chevy owner, I want to be offended by that, but it's true

  • Slavuta Inflation creation act... 2 thoughts1, Are you saying Biden admin goes on the Trump's MAGA program?2, Protectionism rephrased: "Act incentivizes automakers to source materials from free-trade-compliant countries and build EVs in North America"Question: can non-free-trade country be a member of WTO?
  • EBFlex China can F right off.
  • MrIcky And tbh, this is why I don't mind a little subsidization of our battery industry. If the American or at least free trade companies don't get some sort of good start, they'll never be able to float long enough to become competitive.
  • SCE to AUX Does the WTO have any teeth? Seems like countries just flail it at each other like a soft rubber stick for internal political purposes.
  • Peter You know we’ve entered the age of self driving vehicles When KIAs go from being stolen to rolling away by themselves.
Next