Editorial: Do Not Buy A 2011 Mustang 5.0

Sajeev Mehta
by Sajeev Mehta

What you see above is the cutaway of the Ford 5.0L mill, taken from the 2010 New York Auto Show. Formerly known as the Coyote V8, the 5.0-packed 2011 Mustang GT hit the showroom floors, winning rave reviews with every journalist lucky enough to get their hands on one. While blogging for TTAC at the New York Auto Show, I hit up the Five-Oh engine displays at the Ford booth. It was a thoroughly technical and suitably beautiful exhibit. Only problem was, it gave away a secret that nobody should know. Camera in hand, I did the deed: a picture tells a thousand words, but this TTAC Editorial still needs about 800 words to go with.

Take a gander at the 5.0’s combustion chamber, highlighted in red. It’s a strange little bump. And nothing more, right? Sure, unless you read between the (casting) lines: its proof that the 5.0 Mustang shall receive a significant improvement in the near future. Yes, Dearborn’s got a trick up its sleeve: direct injection.

I spoke with one of the well-versed product specialists, a booth babe in true TTAC style, aside from the fact that he was most certainly not a “she.” No, I never asked if he came with the car, but I did challenge him to explain the 5.0’s tempting cylinder head design. And while he never said anything quotable, the look on his face was picture perfect: if I told you, I’d have to kill you.

Typical auto show banter between savvy product specialists and bored car hacks? Perhaps. But the fact remains, nobody should buy a Mustang GT until that casting bump turns into a hole for a fuel injector. But what’s the big deal?

Direct fuel injection, as opposed to (intake) port fuel injection, is the latest technology in the advancement of the internal combustion engine. It’s one of many advancements that proves the piston engine gets better with age, and beats the dubious “Moore’s Law” argument of Tesla fans. And the proof is already on the street: owners of late model diesels, EcoBoost Fords several GM products like the Cadillac CTS already know the drill: direct injection gives more power, more economy and lower emissions with zero changes to the driving experience. It is the textbook definition of having your cake and eating it too.

Geek Alert! Let’s get detailed: a port fuel injection vehicle has the fuel injector placed in the intake manifold, usually at the end of the runner, behind the intake valve. Direct Injection places the injector in the red circle from the picture above: so there’s no more mixing of air and fuel in the intake. The benefit is simple: injecting the fuel at a very high pressure (2000psi, compared to 10-60 psi) directly into the combustion chamber produces a cooling charge. Much to the joy of mechanical engineers everywhere, “cold” fuel gets shot into a hot combustion chamber: Thermodynamics wins. This helps reduce engine knock, so higher ignition timing and/or compression ratios can be implemented. Just like sane doses of Nitrous Oxide on a motor, the extra cooling charge afforded by Direct Injection is a huge win by itself.

The doubters might mention the Jaguar XF makes “only” 385 horses with its direct injected 5.0L mill, which is less than the current Mustang’s 412 ponies. But both 5.0s come from different engine families. And when you consider the Jag’s power bump from port to direct injection, the improvement is real.

Even if my theory is correct, there’s no guarantee that the direct injected Mustang shall be any more powerful than the current model. Ford can pull a fast one: de-tuning the direct injected 5.0 for a multitude of reasons. Thanks to drive-by-wire and traction control nannies, the direct injected 5.0 can easily give 80% of a day’s work and nobody will notice. Considering damn near every vehicle today has power robbing torque management built into its DNA, why would Ford up the Mustang to its full potential?

Go back to 1986: the year that port fuel injection (@200hp/285tq) took the 5.0’s game to refined places the Holley four-barrel (@210hp/270tq) of 1985 couldn’t even imagine. Torque went up, but the 1986 Mustang lost 5% in peak horsepower. Cue the modestly-redesigned 1987 Mustang: a quickie head swap to ye olde F-150 parts turned the Mustang’s EFI 5.0 (@225hp/300tq) into the real deal. That’s a healthy 7 and 11% increase in hp/tq over 1985’s tried and true Holley carburetor. All of which signaled the end to our fascination with glorified toilet bowls on engines. For the better!

Imagine if the direct injected 5.0 pulls a “1987” on us: the 412hp/390tq we see today will be nothing compared to the 441hp/433tq of our near future. It’s entirely possible. But will history repeat itself? Don’t say I didn’t warn you.

Sajeev Mehta
Sajeev Mehta

More by Sajeev Mehta

Comments
Join the conversation
5 of 91 comments
  • Moparman426W Moparman426W on Jul 19, 2011

    I just clicked on the article in hot rod magazine regarding the coyote. According to Ford engineers direct injection is only useful in turbo or supercharged engines, and that the advantage of DI over port injection in naturally aspirated engines is only around 1 percent.

    • See 1 previous
    • Moparman426W Moparman426W on Jan 18, 2013

      @DC Bruce Bruce, I was a bit puzzled when I found out about the Focus now having DI after reading the article. It was either in hot rod or popular hot rodding, and is viewbale online. They did an article on the coyote with pics of the internals and the engineer that they talked with made the statement.

  • Moparman426W Moparman426W on Feb 15, 2012

    @auotdoctor, if the plug wires were removed on the vette then how did it shoot flames from the throttle bodies? The spark plugs would not have been firing.

    • DC Bruce DC Bruce on Jan 18, 2013

      Think he said the wires were routed in correctly (e.g. the wire that was supposed to go for the plug on the #7 cylinder was connected to the #5 or something like that). Cranking an engine mis-wired like that can result in the spark plug firing in a cylinder on the intake cycle, with the intake valve opened. The ignited fuel mixture will blow back up the intake channel into the carburetor (if there is one) or the intake manifold in a fuelie engine. Usually, the air cleaner is supposed to suppress any flash from getting outside, but if you have the air cleaner off, or if it's vestigial (as was common on "souped-up" carburetor engines, then you've got a backfire flame in the engine compartment. That's why engines operating even in clean air environments (like inboard boat engines) have flash suppressors on their intakes . . . even diesels.

  • MaintenanceCosts It's not a Benz or a Jag / it's a 5-0 with a rag /And I don't wanna brag / but I could never be stag
  • 3-On-The-Tree Son has a 2016 Mustang GT 5.0 and I have a 2009 C6 Corvette LS3 6spd. And on paper they are pretty close.
  • 3-On-The-Tree Same as the Land Cruiser, emissions. I have a 1985 FJ60 Land Cruiser and it’s a beast off-roading.
  • CanadaCraig I would like for this anniversary special to be a bare-bones Plain-Jane model offered in Dynasty Green and Vintage Burgundy.
  • ToolGuy Ford is good at drifting all right... 😉
Next