Piston Slap: Friction Modification for The Mighty-Mighty Marquis?

by Sajeev Mehta

Published: January 20th, 2010

piston slap friction modification for the mighty mighty marquis

Jeremy writes:

Hello Sajeev, I have a 1993 Mercury Grand Marquis that I picked up from a family member a couple years back. I registered the car in my name with only 37,000 miles on the clock, it now has just over 51,000. The car was garage kept for years. I have updated the fuel filter, spark plugs, tires, air filter, and the regular oil changes.

After driving the car for a while I noticed the transmission shifted with a slow “shudder” from 3rd to 4th gears. The transmission seemed to shift smoothly under light acceleration but mild to brisk acceleration is accompanied by the transmission shudder.

I checked around online and found that this is not an isolated case. In fact, Ford released a TSB on the issue with this transmission. The TSB stated the transmission fluid needed to changed to handle the problem. I took the car in to an Ammaco last month for the fluid and filter swap. I picked up the car for a test drive and the transmission shifted without the shudder. Within a couple of hours the shudder was back.

I am completely lost on this issue. I do not know if the transmission shop dropped the ball on the fluid swap or if the transmission might be shot. You help is greatly appreciated!

Sajeev Replies:

And here I thought the mighty-mighty Marquis was completely bulletproof! Every website has the Ford Panther Chassis faithful blogging to that effect. Of course, Ford’s less-than-stellar tranny track record since the dawn of automatic overdrive transmissions is common knowledge, even to the fanbois.

Luckily this problem has a quick fix, especially at your mileage: damage to the transmission’s hard points aren’t likely. Yes, you needed the switch to Mercon V ATF (Mercon III was from the factory) but sometimes that isn’t enough to fix the shudder. Because there’s no miracle cure in a bottle.

Well, except when there is. Ford had a similar transmission problem with Explorers circa 2004 (rough engagement into drive). They couldn’t use the Mercon V excuse again, after 10-ish years of using it at the factory, so they recommended a friction modifier: in this case, a bottle of Lubeguard Red. People on various Fat-Ford forums agree, and I my mother’s (former) Lincoln Aviator absolutely loved to shift after the dealer added it. Or so I remember.

(Send your queries to mehta@ttac.com)

#GrandMarquis #Mercury #PistonSlap

Sajeev Mehta

More by Sajeev Mehta

Comments

Join the conversation

2 of 18 comments

Contrarian on Jan 21, 2010

Wow, I was about to recommend Lubeguard Red based on my recently departed GMarq. Yes, it helps.

Like Reply
Accs on Feb 08, 2010

Go get it checked out for any cruise control switche recalls.. Lord knows they have issues going back 20yrs.

Like Reply

Recent Comments

MaintenanceCosts Nobody here seems to acknowledge that there are multiple use cases for cars.Some people spend all their time driving all over the country and need every mile and minute of time savings. ICE cars are better for them right now.Some people only drive locally and fly when they travel. For them, there's probably a range number that works, and they don't really need more. For the uses for which we use our EV, that would be around 150 miles. The other thing about a low range requirement is it can make 120V charging viable. If you don't drive more than an average of about 40 miles/day, you can probably get enough electrons through a wall outlet. We spent over two years charging our Bolt only through 120V, while our house was getting rebuilt, and never had an issue.Those are extremes. There are all sorts of use cases in between, which probably represent the majority of drivers. For some users, what's needed is more range. But I think for most users, what's needed is better charging. Retrofit apartment garages like Tim's with 240V outlets at every spot. Install more L3 chargers in supermarket parking lots and alongside gas stations. Make chargers that work like Tesla Superchargers as ubiquitous as gas stations, and EV charging will not be an issue for most users.
MaintenanceCosts I don't have an opinion on whether any one plant unionizing is the right answer, but the employees sure need to have the right to organize. Unions or the credible threat of unionization are the only thing, history has proven, that can keep employers honest. Without it, we've seen over and over, the employers have complete power over the workers and feel free to exploit the workers however they see fit. (And don't tell me "oh, the workers can just leave" - in an oligopolistic industry, working conditions quickly converge, and there's not another employer right around the corner.)
Kjhkjlhkjhkljh kljhjkhjklhkjh [h3]Wake me up when it is a 1989 635Csi with a M88/3[/h3]
BrandX "I can charge using the 240V outlets, sure, but it’s slow."No it's not. That's what all home chargers use - 240V.
Jalop1991 does the odometer represent itself in an analog fashion? Will the numbers roll slowly and stop wherever, or do they just blink to the next number like any old boring modern car?