The Truth About Cars » polymer The Truth About Cars is dedicated to providing candid, unbiased automobile reviews and the latest in auto industry news. Sat, 26 Jul 2014 14:51:02 +0000 en-US hourly 1 The Truth About Cars is dedicated to providing candid, unbiased automobile reviews and the latest in auto industry news. The Truth About Cars no The Truth About Cars (The Truth About Cars) 2006-2009 The Truth About Cars The Truth About Cars is dedicated to providing candid, unbiased automobile reviews and the latest in auto industry news. The Truth About Cars » polymer Ur-Turn: Not Your Grandmother’s Nylons Thu, 02 Jan 2014 12:30:22 +0000 OLYMPUS DIGITAL CAMERATTAC reader Dean Trombetta sent us an article on anti-freeze resistant nylon and its applications in the automotive world.

In early 2011, a class action lawsuit was filed against Porsche alleging that the company knowingly installed defective coolant pipes made of nylon into engines of Cayenne model SUV’s. Apparently, the pipes are very likely to fail prematurely resulting in serious engine damage. If the vehicle is out of warranty, customers end up spending big bucks to repair their engines and replace the coolant pipes. The replacement coolant pipes are made of aluminum.


Most of the readers here probably know that this is not the first time that plastic coolant fittings have failed in a spectacular fashion. In the early 2000′s Ford settled a class action lawsuit brought by owners of various vehicles that had 4.6L V-8′s with intake manifolds made of Nylon. These intake manifolds failed at the coolant passage. The intake manifold was replaced with a new design in which the coolant passage was made of… you guessed it, aluminum.

DuPont was at the forefront of the drive to use Nylon, specifically Glass Fiber reinforced Nylon 6/6 for engine parts starting with radiator end caps which were first adopted by Ford in 1986. Later, in 1996, the first intake manifolds manufactured from the same material started appearing on cars. Nylon intake manifolds have since become ubiquitous and I think that the technology is proven at this point. There are several advantages of using plastic in place of steel or aluminum for intake manifolds. The plastic intake manifolds are lighter weight, the passages can be made smoother which helps deliver fuel more efficiently and probably the number one reason is that they keep the fuel cooler helping the engine run better.

The nylon is typically glass fiber reinforced containing 30-35% by weight what is called “short glass fiber” in the industry meaning that the fibers are approximately 1/16 inches long. The glass fiber adds enormous tensile strength and rigidity to the material. Unreinforced nylon 6/6 has a tensile strength of approximately 12,000 psi while 35% glass fiber reinforcement bumps the tensile strength up to roughly 28,000 psi. This is approaching the tensile strength of some softer grades of steel. Nylon by itself would not bond to glass very well. To facilitate the marriage of these two materials, the glass fiber is coated with proprietary “coupling agents” that allow the nylon to bond to it.

Compared to standard glass fiber reinforced grades of nylon, the anti-freeze resistant grades use better coupling agents as well as heat stabilizers to help the plastic hold up to the elevated temperatures better. The anti-freeze and the organic acids that have been added to anti-freeze in recent years as corrosion inhibitors are thought to attack the bond between the glass fiber and the nylon thus weakening the material.

Whatever is going on chemically, one thing is for sure, the damage done to the nylon over time is severe. A little perusing of the DuPont website revealed a little bit of data on the affects. First to be clear, nylon materials are typically tested in what is called a “dry as molded” condition. The properties of nylon are severely affected by humidity, so in order to maintain some consistency of test results, testing is always performed on specimens that are taken right off of the molding machine and sealed into air tight containers. Here is what we would expect for tensile strength dry as molded and then after being exposed to a 100% relative humidity environment and then finally after prolonged exposure to engine coolant.

Typical Nylon 6/6 35% Glass Fiber Reinforced Tensile Strength

Dry as molded  at 23C                                                     29000 psi

24 hrs at 100% relative humidity at 23C                   11600 psi

24 hrs at 100% relative humidity at 130C                8265 psi

1000 hrs exposure to 50/50 Zerex® at 130C          5800 psi

5000 hrs exposure to 50/50 Zerex® at 130C          1450 psi

As you can see exposure to the anti-freeze has a significant impact on the properties of the material and this is under ideal conditions. Molded test specimens are designed to produce consistent test results and do not typically have the molding variations that will be experienced in production parts that are cranked out by the tens of thousands. These parts can have significantly lower properties than we see here.

I suppose an automaker could make the claim that these parts are considered wear items and must be replaced as part of regular maintenance. But, I would suggest that a customer buys a car with the expectation of not having to replace major engine components for a reasonable length of time. Furthermore, any components whose failure will cause catastrophic damage to other engine components should be built to last a very long time. Unfortunately, the history and the data seem to indicate that the plastics that are currently being used for parts exposed to engine coolant are not really suitable.



]]> 127
Piston Slap: Paint Protection Possibilities? Wed, 15 Aug 2012 12:39:48 +0000


George writes:


I’m the owner of the dark green 1999 Honda Accord Coupe that appeared in prior editions of Piston Slap. Its paint is failing (clearcoat starting to peel and gray patches showing) after many years of sun exposure here in the Dallas area and it’s time to get a new car. I have a garage to protect the car at night, but my engineering career requires that my car spend the day out in the sun on a concrete parking lot. The good news is my cars never get exposed to road salt and snow, ice, frost, and morning dew are pretty much a non-issue for cars that spend the night in a garage.

1) What color paint resists damage from sunlight best?

2) Do any waxes or other products work significantly better than others?

3) Would covered parking during the day add years to paint or are pollutants like ozone attacking the finish in the shade?

Sajeev answers:

Clear coat only lasts so long, even on vehicles that spend the majority of their lives in a garage.  And if you own one of those vehicles from the early 1990s that were on the losing end of paint booth/environmental regulations, the clear coat failed far too early. You could easily repaint your Accord and be happy, but maybe it’s time to find a new “paint job” to call your own.

To answer your questions:

1. I’m no experienced body shop dude, but I know a couple. Ordinary white (like you see on fleet vehicles) is probably the most durable color against the elements. And the most forgiving to hide/repair scratches, which is worth considering.

2. That’s hot button issue.  I will stick with one big generality: the caranuba-based waxes don’t hold a candle to the newer polymer based waxes.  I’ve even heard manufacturers mention that the polymer waxes last many months longer than the traditional stuff.

3. I think covered parking improves the lifespan of any paint job, not to mention the well-being of your rubber bits and interior fabrics.  This is a no brainer….right, B&B???

Send your queries to Spare no details and ask for a speedy resolution if you’re in a hurry.

]]> 26