By Frank Williams
July 7, 2008 -
Japan has laws mandating the size of your waistline. And now the auto companies are slimming down their cars–any way they can. Automotive News [sub] reports Nissan plans to reduce its fleet's average weight by 15 percent by 2015 (from 2005 levels). Toyota is looking for a 10 percent loss. Mazda wants to pare 220 lbs. from each of its new models. Honda's trimming down (2008 Accord notwithstanding), but hasn't publicized any goals. Automakers are doing what they can to lose weight, from using aluminum and plastic body panels to re-engineering existing components to make them lighter. For example, the next Prius' electric motor will be one-sixth as heavy as the current powerplant; the batteries will weigh half as much. Honda's even going so far as to shave off slivers of steel between spot welds on the Fit to save a few ounces overall. Adding lightness is an expensive business, but with existing safety regulations and new fuel efficiency standards, there may be no choice.
Subscribe to New Content Alerts9 Comments on “ Metabo Mania Hits Japanese Automakers ”
Leave a Reply 
Back to Top
You must be logged in to post a comment.
BlinkList
Digg
del.icio.us
Facebook
Furl
Google
Live
NewsVine
Reddit
StumbleUpon
Technorati
YahooMyWeb
POWERED
July 7th, 2008 at 3:46 pm
I'm looking forward to what Mazda can do. 220 lbs down for the next Mazda3? count me in.
Edit: what happened to the comment above mine? Erasing evidence of typos, are we?
July 7th, 2008 at 4:08 pm
“For example, the next Prius’ electric motor will be one-sixth as heavy as the current powerplant; the batteries will weigh half as much.”
Seriously? That is awesome.
I don’t [sub] to AN. Any mention of Detroit’s plans to “add lightness?”
July 7th, 2008 at 4:12 pm
KixStart:
I don’t [sub] to AN. Any mention of Detroit’s plans to “add lightness?”
No.
July 7th, 2008 at 4:49 pm
Lighter cars? Count me in!
July 7th, 2008 at 4:59 pm
To Ford’s credit, they did announce plans to reduce vehicle curb weights along with using the twin-force engines in their plans to reduce consumption.
July 7th, 2008 at 5:04 pm
Ford’s effort is to use ‘Nano coatings” to reduce vehicle weight:
http://www.nextenergynews.com/news1/next-energy-news4.18.08a.html
July 8th, 2008 at 12:15 am
“Mazda wants to pare 220 lbs. from each of its new models.”
RX8 Model Year 2006 - 1337 KG
RX8 Model Year 2008 - 1374 KG
Hmmm….
July 8th, 2008 at 7:09 am
Hmmm… I guess domestic carowners will have to trim off their own waistlines to reduce fuel costs…
July 8th, 2008 at 8:59 am
Firstly, please note that the Prius weight reductions are quoted, in the original article, as being compared with the “1st generation” Prius (not current).
The current Prius is the “2nd generation” - perhaps someone knows what weight reductions there were already between the 1st & 2nd generations?
Secondly, I work in the electric motor industry and I would be very surprised if you could produce a motor with the same power for only 1/6 of the weight!
The latest weight optimization developments in electric motors are mostly related to the magnets, which can be significantly reduced in size & weight when going from ferrite to neodymium. However, this would not result in a 5/6 reduction. The rest of the motor is made primarily from steel laminations & copper windings, which are needed to produce the necessary torque/power.