Junkyard Find: NO, IT'S NOT A HEMI!

Murilee Martin
by Murilee Martin

The good old Chrysler 318 engine has been around since, oh, around the start of the Iron Age. From about 1,000 BC to 2002 AD, the 318 and its LA engine relatives were installed in Chrysler products, and they did a fine job. If it hadn’t been for the cockroach-grade immortality of the Chrysler Slant Six, in fact, we’d probably be talking about the 318 as the most unkillable engine Detroit ever made. In 1992, Chrysler updated the 318 (which had gone to a roller cam a few years before) with high-pressure multi-point fuel injection and more emission-friendly heads… and they called it the 5.2 Magnum, no doubt because the original Dodge Magnum hadn’t been good enough to justify such a cool name. As I discovered in a Denver wrecking yard last week, at least one Dakota owner was proud enough of his Magnum to apply a full-body vinyl wrap to his truck.

I’m hoping that this truck was owned by a shop specializing in hot-rodded Magnums for the off-road crowd, or some sort of outdoorsy engine-related business, because getting a screaming-eagles-and-virgin-forest vinyl wrap job for a Dakota seems somewhat creepy otherwise.

Here it is: Magnum.

I might be talking heresy here, but a Hemi in a Dakota sounds like a fine idea to me.





Murilee Martin
Murilee Martin

Murilee Martin is the pen name of Phil Greden, a writer who has lived in Minnesota, California, Georgia and (now) Colorado. He has toiled at copywriting, technical writing, junkmail writing, fiction writing and now automotive writing. He has owned many terrible vehicles and some good ones. He spends a great deal of time in self-service junkyards. These days, he writes for publications including Autoweek, Autoblog, Hagerty, The Truth About Cars and Capital One.

More by Murilee Martin

Comments
Join the conversation
3 of 32 comments
  • Moparman426W Moparman426W on Feb 12, 2012

    There was absolutely nothing wrong with the transmissions in the 90's dakotas. The A-500 that came behind the V6 and 318 2WD models was the 999 torgueflite with an electric overdrive unit added to the tailshaft. Same thing with the A-518 used in the 318 4X4's. It was the rugged 727 with overdrive on the tailshaft. Other than the overdrive they used the same parts as the older torqueflites, even filters and gaskets interchanged. The switch that activates the overdrive was known to go bad, which was an esay fix. Some people even bypassed it and used a toggle switch on the dash. Starvingteacher, the 318 was tougher than a 283 for the same reasons that all other A engines were togher than small block chevies. Higher nickel content in the block, with thicker bulkheads and beefier main caps with bigger bolts. They also used longer and beefier rods and and the head bolts were further from the bore resulting in less bore distortion than a chevy. The mopar also used bigger diameter lifters with wider cam lobes and a better hardening process than the chevy. That was why worn cams were a rare sight on mopars, very common on chevies before they switched to the roller design in 87. The 440 Magnum was a highly respected engine back in the day because it was chrysler's top dog on the street. They only sold around 2k hemi's a year due to the high price, and the majority of those sold ended up on the drag strip, they were a very rare sight on the streets.

    • Wstarvingteacher Wstarvingteacher on Feb 12, 2012

      I wish everyone was able (and did) give such detailed factual responses. Good job.

  • And003 And003 on May 14, 2012

    From where I stand, Murilee, you're not talking heresy. A 3G Hemi would be a perfect powerplant for a Dakota. As for the Magnum engine itself, I could imagine it being installed in an old specialty car from the 1950s, perhaps something from LaDawri or Victress.

  • MaintenanceCosts It's going to have to go downmarket a bit not to step on the Land Cruiser's toes.
  • Lorenzo Since EVs don't come in for oil changes, their owners don't have their tires rotated regularly, something the dealers would have done. That's the biggest reason they need to buy a new set of tires sooner, not that EVs wear out tires appreciably faster.
  • THX1136 Always liked the Mustang though I've never owned one. I remember my 13 yo self grabbing some Ford literature that Oct which included the brochure for the Mustang. Using my youthful imagination I traced the 'centerfold' photo of the car AND extending the roof line back to turn it into a small wagon version. At the time I thought it would be a cool variant to offer. What was I thinking?!
  • GregLocock That's a bodge, not a solution. Your diff now has bits of broken off metal floating around in it.
  • The Oracle Well, we’re 3-4 years in with the Telluride and right around the time the long term durability issues start to really take hold. This is sad.
Next